2008 E63 dyno disaster !!!!!
Is it because i still have not done the 1000-3000 service ?
Or is it that they govern the HP for the break in period ?
I really dont think so since on the street its lighting up the tires in 3rd gear .
The dyno guy said that the cpu shuts it down when its on a dyno sometimes , Has anyone ever heard of this ?
Does anyone know why the car is doing this ? Please give me some info .
If this car for 100k can only get 300hp to the wheels ill bring it back tomorrow .
However, 450 at the wheels is impossible, these cars dyno 380-390whp stock and in rare instances, 400-410whp.
However, 450 at the wheels is impossible, these cars dyno 380-390whp stock and in rare instances, 400-410whp.
what dyno mode ???? And the car was cold too . You really think you lose 20% hp @ the wheels ?????
should see around 410 to 420..
definately not 450.
QUOTE]
+1
410-420 is the number you should see
If the car is lighting up the tires in 3rd you have no reason to be worried,dynos are all different&the real dyno is the dragstrip;the numbers don't lie there
Trending Topics
https://mbworld.org/forums/c32-amg-c55-amg-w203/201412-dyno-mode.html
The Best of Mercedes & AMG
Maybe the 63'ers could help me out. Not sure if it's the same.
Link to video here. Bout 16meg
Sorry not all of us can live in MIAMI lol thx for the info anyway .
now go get me an order of fried calamari and meatballs from cafe materano and email to me !!!!!!!
ps also some bread too and hold the scarface musak
Sorry not all of us can live in MIAMI lol thx for the info anyway .
now go get me an order of fried calamari and meatballs from cafe materano and email to me !!!!!!!
ps also some bread too and hold the scarface musak

Also, is this your first benz? First AMG?
FOUND OUT IT WAS THE DYNO MODE THAT WE DID NOT SHUT DOWN THAT CAUSED THE PROBLEM
Also, I would wait until 5,000 miles before another dyno. It is possible that the ECU is regulating power until the engine is fully broken in.




On the 63s, you do not need to use dyno mode.
First two runs will be TQ limited by ESP. On the third run it will show a fault on the dash and than allow full power.
Stock car will be in 410-420 RWHP, 360-380RWTQ.
See this thread:
https://mbworld.org/forums/showthrea...ighlight=vr530
Sorry not all of us can live in MIAMI lol thx for the info anyway .
now go get me an order of fried calamari and meatballs from cafe materano and email to me !!!!!!!
ps also some bread too and hold the scarface musak

Actually it is because of lower torque numbers dyno mode should be used. It will achieve the best #s.
Here is a 63 that hit over 450 at the wheels stock. And I know of another CLS 63 (TREZ) who hit 440! so yeah it can happen but its about 1% of the cars, most dyno at 400-420 385-405tq
https://mbworld.org/forums/showthrea...ht=trez63+dyno



haha


