Star Diagnostic How To DIY with lots o pics
#1126
Member
BoostedAero,
Thanks! You are right in that I am looking into it but Dallas, while not as hot as your locale, can get pretty warm and humid. Traffic is also an issue and poor airflow across the front of the car could mean the difference in comfort commuting to work.
We spend an inordinate amount of time standing still here!
Thanks! You are right in that I am looking into it but Dallas, while not as hot as your locale, can get pretty warm and humid. Traffic is also an issue and poor airflow across the front of the car could mean the difference in comfort commuting to work.
We spend an inordinate amount of time standing still here!
#1127
Today I noticed that my instrument cluster display no longer shows "vehicle rising" when I press the button to lift the car.
I did recently do the star mod to add the fuel remaining display, but I can't see how that would have affected it.
Any ideas? 05 E55
I did recently do the star mod to add the fuel remaining display, but I can't see how that would have affected it.
Any ideas? 05 E55
#1128
MBWorld Fanatic!
Join Date: Jan 2014
Location: Republic of Texas
Posts: 3,222
Received 930 Likes
on
722 Posts
'99 and '05 E55 AMG
722.6 transmission clutch and brake packs wear
How to check your 722.6 transmission clutch and brake packs for wear prior to failure.
https://mbworld.org/forums/w211-amg/...rmination.html
https://mbworld.org/forums/w211-amg/...rmination.html
The following users liked this post:
seanol (05-30-2017)
#1130
Are these the ones you bought from https://tpms247.com/ that we discussed here https://mbworld.org/forums/w211-amg/...s-sensors.html ?
#1133
Senior Member
#1135
I have a problem, i bought only c4 multiplexer 3 months ago and it was working fine. Now suddenly it shows me an automatic updating altought the laptop was never connected to the internet ?
I've tried other multiplexers of my friends and they work fine ..
Any idea ?
I've tried other multiplexers of my friends and they work fine ..
Any idea ?
#1136
Solution
00 is incorrect, it should be 21, if you could not reset it to 21, please take the photo of screen display and show me.
#1138
MBWorld Fanatic!
Join Date: Oct 2012
Location: Florida
Posts: 1,425
Received 98 Likes
on
88 Posts
2002 CLK 55 AMG cabriolet Eurocharged
Yea, I have never seen that one.
My system gives a failed to update flag along with all the other old Windows XP flags.
You really dont want XP online. It was an Icon for windows in computing but extremely vulnerable to todays criminals.
For those with XP, it should be run with Maximum firewall for VPN, and if the PC absolutely need help get TOR browser.
Most of the Hard Drives for C4 do not have enough storage but a networked Virtual Box image will keep it safe as well.
It takes some knowledge, but an easy way to get outside help on a secure server would be to create a VPN database with Apache.
Hope this gives some a few ideas.
Cheers
My system gives a failed to update flag along with all the other old Windows XP flags.
You really dont want XP online. It was an Icon for windows in computing but extremely vulnerable to todays criminals.
For those with XP, it should be run with Maximum firewall for VPN, and if the PC absolutely need help get TOR browser.
Most of the Hard Drives for C4 do not have enough storage but a networked Virtual Box image will keep it safe as well.
It takes some knowledge, but an easy way to get outside help on a secure server would be to create a VPN database with Apache.
Hope this gives some a few ideas.
Cheers
#1139
Any system number is fine. The numbers are only there to identify the system in large dealerships where there are more than just one SD floating around. Pick any number.
The update can easily be deactivated. A better way is to actually update the SD Connect properly with this update. It will not hardware block it. Send TeamViewer login via PM if you wish to get help.
There was a reason why an original SD system could not go online natively, but only through the dealership's secured network. And even that was only limited to a few MB specific websites.
Now on win 7 they changed that philosophy tremendously and not necessarily to the best. I personally never had to go online with my SD laptop. Everything is on the laptop that is needed to work on cars. But a VPN is def. a good way of doing it.
The update can easily be deactivated. A better way is to actually update the SD Connect properly with this update. It will not hardware block it. Send TeamViewer login via PM if you wish to get help.
There was a reason why an original SD system could not go online natively, but only through the dealership's secured network. And even that was only limited to a few MB specific websites.
Now on win 7 they changed that philosophy tremendously and not necessarily to the best. I personally never had to go online with my SD laptop. Everything is on the laptop that is needed to work on cars. But a VPN is def. a good way of doing it.
Last edited by Mackhack; 07-26-2017 at 02:09 PM.
The following users liked this post:
Brabus388 (08-21-2021)
#1140
exclamation mark on exentry quick test
i have a mercedes w211 220cdi 2003, that only want to start sometimes
i have tryed to scan the system, and i can get readings of the fault codes on the gearbox, the transmission has a exclamation mark on it, and no F!!
what does that mean??
when i use the magnifying glass, to check the codes, i got these strange codes
p2300
p2310
p2311
p2312
p2313
p2314
p2315
p2316
i have tryed to scan the system, and i can get readings of the fault codes on the gearbox, the transmission has a exclamation mark on it, and no F!!
what does that mean??
when i use the magnifying glass, to check the codes, i got these strange codes
p2300
p2310
p2311
p2312
p2313
p2314
p2315
p2316
#1141
i have a mercedes w211 220cdi 2003, that only want to start sometimes
i have tryed to scan the system, and i can get readings of the fault codes on the gearbox, the transmission has a exclamation mark on it, and no F!!
what does that mean??
when i use the magnifying glass, to check the codes, i got these strange codes
p2300
p2310
p2311
p2312
p2313
p2314
p2315
p2316
i have tryed to scan the system, and i can get readings of the fault codes on the gearbox, the transmission has a exclamation mark on it, and no F!!
what does that mean??
when i use the magnifying glass, to check the codes, i got these strange codes
p2300
p2310
p2311
p2312
p2313
p2314
p2315
p2316
#1142
Marry ecu and eis/key
I need to change engine control module.(near fromt sam)
So how do i marry these, i will take the ecu with the key and eis
From a wrecked car
Its a w211 220cdi 2003
I guess i just need to code the new vin, but where!
Xentry
Control units, and then?
So how do i marry these, i will take the ecu with the key and eis
From a wrecked car
Its a w211 220cdi 2003
I guess i just need to code the new vin, but where!
Xentry
Control units, and then?
#1143
Good luck.
The following users liked this post:
larsianer (08-23-2017)
#1144
Thank you mackhack
Any suggestions on what i should do?
Give that car, or go to the dealership?
Any suggestions on what i should do?
Give that car, or go to the dealership?
The following users liked this post:
larsianer (08-23-2017)
#1146
MBWorld Fanatic!
Join Date: Jan 2014
Location: Republic of Texas
Posts: 3,222
Received 930 Likes
on
722 Posts
'99 and '05 E55 AMG
Assyst Plus - Plus Check it out
Valuable tool to verify maintenance if hard copies are not available. Only applies if work performed via dealer or a conscientious owner/maintainer.
Playing around with the system and found this via the simulation. Tried it today while performing a B service.
Go to:
-Information and Communication
-Assyst Plus - Plus
-General Servicing
-Service Memory
Peruse the entries that show number of days since Central Gateway enabled, days since last service, mileage at time of service, shop designator, and service items confirmed during the service.
If you don't have access to the hard copy records, the Central Gateway maintains all services in memory so long as the Flexible Service System procedures are followed.
Very nice feature. Makes me look forward to my next Mercedes.
Playing around with the system and found this via the simulation. Tried it today while performing a B service.
Go to:
-Information and Communication
-Assyst Plus - Plus
-General Servicing
-Service Memory
Peruse the entries that show number of days since Central Gateway enabled, days since last service, mileage at time of service, shop designator, and service items confirmed during the service.
If you don't have access to the hard copy records, the Central Gateway maintains all services in memory so long as the Flexible Service System procedures are followed.
Very nice feature. Makes me look forward to my next Mercedes.
#1148
Does this Work For w221 also?
So I thought I would help out a few MB brothers with a couple star diagnostic tutorials...
First, Lowering the car.
Get to the 211 Section
Attachment 383602
You will get to the main menu
Attachment 383603
Then go to Func perf by more than...
Attachment 383604
Then Chassis
Attachment 383605
Then Level adj
Attachment 383606
Then Suspension
Attachment 383607
And here is where people have problems, they just go to actuations and then lower it, IT WILL NOT STAY LOWERED this way, you have to go to initial startup
Attachment 383608
Then Initial with manual settings
Attachment 383609
Then F2
Attachment 383610
Here you will see a screen that shows the voltages which correspond to the height of the vehicle. they must be within the given ranges in the left hand column. use the + and - buttons to lower the car (In my screenshot I am in the car with a friend in the back seat, so that is why it is at 3.27, it should not exceed 3) Then hit F2
Attachment 383611
Enter in these inclination angles and if the car is within the voltages supplied in the page before, the car will accept the new lowered setting, if not it will reject it.
Attachment 383612
Now, how to activate the unlock and lock beep (honestly, one of the best mods to do if you have an older model e55 )
First Control units
Attachment 383613
Then Body
Attachment 383614
Then rear SAM
Attachment 383615
Then Control unit adaptations
Attachment 383616
Then national version of ATA function
Attachment 383617
At this screen you will see a pull down menu with a list of different regions on it. The only ones you need to worry about are USA with buzzer and Netherlands. If you choose USA, i will give you three short quick beeps when you lock the car and one short when you unlock it. Netherlands will give you three longer beeps when you lock the car and one long when you unlock it. Personal preference on which one you like. Then hit F3
Attachment 383618
Then F3(YES)
Attachment 383619
Hope this helps out some people. I really did not find a good DIY for Star Diagnostics, so I thought I would help out!
Thanks
Aleks
EDIT: Info for -10 Mod added
First, Lowering the car.
Get to the 211 Section
Attachment 383602
You will get to the main menu
Attachment 383603
Then go to Func perf by more than...
Attachment 383604
Then Chassis
Attachment 383605
Then Level adj
Attachment 383606
Then Suspension
Attachment 383607
And here is where people have problems, they just go to actuations and then lower it, IT WILL NOT STAY LOWERED this way, you have to go to initial startup
Attachment 383608
Then Initial with manual settings
Attachment 383609
Then F2
Attachment 383610
Here you will see a screen that shows the voltages which correspond to the height of the vehicle. they must be within the given ranges in the left hand column. use the + and - buttons to lower the car (In my screenshot I am in the car with a friend in the back seat, so that is why it is at 3.27, it should not exceed 3) Then hit F2
Attachment 383611
Enter in these inclination angles and if the car is within the voltages supplied in the page before, the car will accept the new lowered setting, if not it will reject it.
Attachment 383612
Now, how to activate the unlock and lock beep (honestly, one of the best mods to do if you have an older model e55 )
First Control units
Attachment 383613
Then Body
Attachment 383614
Then rear SAM
Attachment 383615
Then Control unit adaptations
Attachment 383616
Then national version of ATA function
Attachment 383617
At this screen you will see a pull down menu with a list of different regions on it. The only ones you need to worry about are USA with buzzer and Netherlands. If you choose USA, i will give you three short quick beeps when you lock the car and one short when you unlock it. Netherlands will give you three longer beeps when you lock the car and one long when you unlock it. Personal preference on which one you like. Then hit F3
Attachment 383618
Then F3(YES)
Attachment 383619
Hope this helps out some people. I really did not find a good DIY for Star Diagnostics, so I thought I would help out!
Thanks
Aleks
EDIT: Info for -10 Mod added
#1149
MBWorld Fanatic!
2.82 gear codeing
Getting ready to swap out rear diff from 2.64 to 2.86 in a E55 and was told I can get into Star and there is a menu for it. Searched and can't seem to find it. Anyone know what menu I need to be in? The screen shot I saw had a whole list of gear ratios listed.
#1150
Should be 2.65 to 2.82.