E55amgsd

Is this a good gap size ?

Elhonaz

Definetly not.. WAY too much!!! it should be .35mm - .45mm only! that looks like maybe 2-3mm to me

E55Greasemonkey

NO. That's WAY too much. As stated, .35 to .45mm. And, please stop posting multiple new threads for your questions, it tends to get annoying and people will be less likely to help.

OCKlasse

Mine has a gap not too far off from that and I have no shims on it.

E55amgsd

Sorry for the multiple posts guys :/ ..but heres a vid j took with no shim on pulley and it closed the gap a bit but still lose ..like I said befor I have nothing against eurocharged im just sharing my issue ..

MindBend

How old is your pulley? Mine had/does have a larger gap that spec indicates, but Shardul says it will closeup after a while. I'll check mine again today.

E55amgsd

Its about 3 months or so ..see the thing that I was told if its a bigger gap I will eventually brake because when s/c engages it will pull the plate back so thats what happen to me :/ ..and now my engagement plate is loose but I hope eurocharged can replace this ..
Also with a bigger gap I nptoce it will take longer for my sc to kik in and I felt my car retarded and now that I took the shim out cloesd the gap a lil more it feels responsive ..but its still broken

DVC

Does less gap engage smoother?

V TO E55

Mine is exactly like that with out shims and I have a very bad s/c clutch engagement I wonder if it's from that?

Oh the pulley is Sharduls smaller clutched s/c pulley if that matters?

E55amgsd

Im sure it does bro I can feel a bit diffrance when I punch it befor the car will lagg a bit den the sc will engage ..

E55amgsd

Yes im sure thats the problem that gap ..
I have a smaller sc pulley but I got it from eurocharhed in a kit also with a tune

V TO E55

I figured

It's been like this ever since I bought it but then again I got a refurbished one from Shardul

I think the EC and Sharduls pulley are the same..they look the same to me.

E55amgsd

Ohh dude why would you get one like that lol ..thats bad to start with but yeah ..I hope they can replace mine

V TO E55

Oh it was because Shardul said it pretty much was new only the pulley it self was slightly used (so bearing and the springs were new)but I bought it to get by till EC finalized the tune for the 77mm clutch less S/C pulley I got from Shardul as well..