DashDaq XL Rediness Monitoring
#1
Super Member
Thread Starter
DashDaq XL Rediness Monitoring
This may seem like a stupid question for some of you. How in the world I can monitor Readiness Status of the different components via my DashDaq XL??? For the life of my I can not find it anywhere in the menus or figure it out! Also what formula re you guys using for monitoring boost. The one in the user manual is useless and it is not correct.
Thanks a ton!
Thanks a ton!
#4
MBWorld Fanatic!
Input Signal: MAP
Multiplier Signal: Constant Multiplier from Rescale Calculator
Multiplier Sign: 1
Constant Multiplier: 1
Offset Signal: Constant Offset from Rescale calculator
Offset Sign: -1
Constant Offset: 14.7
Name it : boost
Grip grip made this and it works
btw try to get a zt2 and get the boost sensor so it's real time
Multiplier Signal: Constant Multiplier from Rescale Calculator
Multiplier Sign: 1
Constant Multiplier: 1
Offset Signal: Constant Offset from Rescale calculator
Offset Sign: -1
Constant Offset: 14.7
Name it : boost
Grip grip made this and it works
btw try to get a zt2 and get the boost sensor so it's real time
#6
MBWorld Fanatic!
Here's the settings from the manufacturer that worked like a charm:
Try these settings in your calculator:
Input Signal: MAP
Multiplier Signal: Constant Multiplier from Rescale Calculator
Multiplier Sign: 1
Constant Multiplier: 1
Offset Signal: Constant Offset from Rescale calculator
Offset Sign: -1
Constant Offset: 14.7
Name: boost
Try these settings in your calculator:
Input Signal: MAP
Multiplier Signal: Constant Multiplier from Rescale Calculator
Multiplier Sign: 1
Constant Multiplier: 1
Offset Signal: Constant Offset from Rescale calculator
Offset Sign: -1
Constant Offset: 14.7
Name: boost
Trending Topics
#10
MBWorld Fanatic!
What do you mean by readiness? Is you dashdaq not picking up the obd signals? If that's the case go to settings and scan via obd for signals and you should have everything. Available through obd in your list
#13
MBWorld Fanatic!
Join Date: Oct 2011
Location: A to the Z (the state)
Posts: 2,279
Likes: 0
Received 26 Likes
on
21 Posts
'06 E55
Do you have the ZT-2? The boost sensor is not very expensive and tapping the surge tank is not very hard. Real-time boost readout without the lag sure is nice to have and doesn't look like stair steps on your data logs.
#14
Super Member
Thread Starter
Yes Sir, I do have the ZT-2. There was a guy here selling surge tanks with a tap in the passenger side for boost sensor. Can you tell me what exactly do i need as far a sensor goes?
#15
MBWorld Fanatic!
http://www.ebay.com/itm/Zeitronix-MAP-Sensor-50psi-3-5-Bar-Boost-/291149125684?pt=Motors_Car_Truck_Parts_Accessories&hash=item43c9d71834&vxp=mtr
Tap the side or end of the surge tank
Tap the side or end of the surge tank
#16
Super Member
Thread Starter
#17
MBWorld Fanatic!
Join Date: Oct 2011
Location: A to the Z (the state)
Posts: 2,279
Likes: 0
Received 26 Likes
on
21 Posts
'06 E55
Not really. Mine is right there by the oil dipstick tube:
Surge tank is really easy to remove. You'll want to remove it so the shavings don't go into the engine (duh).
Surge tank is really easy to remove. You'll want to remove it so the shavings don't go into the engine (duh).
#19
Super Member
Thread Starter
Input Signal: MAP
Multiplier Signal: Constant Multiplier from Rescale Calculator
Multiplier Sign: 1
Constant Multiplier: 1
Offset Signal: Constant Offset from Rescale calculator
Offset Sign: -1
Constant Offset: 14.7
Name it : boost
Grip grip made this and it works
btw try to get a zt2 and get the boost sensor so it's real time
Multiplier Signal: Constant Multiplier from Rescale Calculator
Multiplier Sign: 1
Constant Multiplier: 1
Offset Signal: Constant Offset from Rescale calculator
Offset Sign: -1
Constant Offset: 14.7
Name it : boost
Grip grip made this and it works
btw try to get a zt2 and get the boost sensor so it's real time
Here's the settings from the manufacturer that worked like a charm:
Try these settings in your calculator:
Input Signal: MAP
Multiplier Signal: Constant Multiplier from Rescale Calculator
Multiplier Sign: 1
Constant Multiplier: 1
Offset Signal: Constant Offset from Rescale calculator
Offset Sign: -1
Constant Offset: 14.7
Name: boost
Try these settings in your calculator:
Input Signal: MAP
Multiplier Signal: Constant Multiplier from Rescale Calculator
Multiplier Sign: 1
Constant Multiplier: 1
Offset Signal: Constant Offset from Rescale calculator
Offset Sign: -1
Constant Offset: 14.7
Name: boost
#20
MBWorld Fanatic!
Hmm weird I used that exactly before I got the zeitronix boost sensor and worked fine and on a few guys Los, can you double check that the negative sign is on where it should be
#21
MBWorld Fanatic!
Also get a good tap for it .. These are decent quality taps. I tried using a cheap harbor freight tap I had in a set .. almost ruined the hole.
This is one I bought and used:
This is one I bought and used: