Help please, having trouble reactivating a new SBC unit
#1
Senior Member
Thread Starter
Help please, having trouble reactivating a new SBC unit
I have tried running through the star reactivation sequence a few times. I already bled my brakes and now I keep getting this error. Is basically telling me that the SBC isn't pressurizing?
I am not too familiar with star. Any help or thoughts would be greatly appreciated.
I am not too familiar with star. Any help or thoughts would be greatly appreciated.
The following users liked this post:
gjunon (06-23-2017)
#4
Senior Member
Thread Starter
So no go. Still at 0 bar. I am beginning to wonder if I am missing something. I changed the old one out pressurized the system and bled all 4 brakes. Am I supposed to bleed the SBC control unit itself?
#6
MBWorld Fanatic!
Double check all your lines going to the unit. I have seen someone mix up a line and it gave a pressure fault. Cross reference with another car.
The following users liked this post:
gjunon (06-23-2017)
Trending Topics
#9
Senior Member
Thread Starter
So you guys won't believe what was wrong with this @#$%*#$% SBC unit.
I ended up going under the hood and shaking the unit while it was actuating and guess what the sound changed and it started sucking up brake fluid... I am beyond words right now...
Anyhow hopefully others can learn from this. Now it is time for a beer.
I ended up going under the hood and shaking the unit while it was actuating and guess what the sound changed and it started sucking up brake fluid... I am beyond words right now...
Anyhow hopefully others can learn from this. Now it is time for a beer.