eagleeye

This is a pic of underneath the hood ornament. How do you remove it? Do you need a special tool? Does the part denoted by the arrow screw out or come out some other way?????

Thanks

t-bone

grab the base that you have in your picture and twist it counterclockwise a quarter turn. i think it's counterclockwise, i don't remember exactly which way. once you do, it will pop out from the top very easily.

ima55r2

When looking up under the hood, hold the star and use some pliers to grab one of the "c" shaped fins to do a 1/4 turn counterclockwise. ..then from the top of the hood, carefully lift the star up and out so you don't scratch the hood.

M5KILLR

first you need an air chisel, a 1/2 drill with an easy out drill bit, a large hammer, duct tape... j/k had the same question then i found out how easy it was. what are you putting in there?

eagleeye

Peter B: humerous. This board could use a little more levity.

eagleeye

Thanks guys. Its in and perfect!

M5KILLR

so post a pic!!!

tjcMBE55AMG

Damn ... I used a Sawzall, didn't know about the air chisel.

Thank God for oversize 'goof' plates!

TJC