Quote:
Any ideas where and how much these are?
Im located in Sydney Australia, so somewhere that can ship internationally would help.
Thanks
Are you trying to keep away from dealership pricing? Your car was likely built at the East London plant here in South Africa and your dealer should be able to get one from here very quickly - Just make sure you get the part number right for your VIN because there were at least 2 forms of that lense in 2003 production - clear to match BiX headlights see my avatar or ribbed and a little more opaque for the standard headlight set-up.Originally Posted by GLO
Hi, i am looking for a replacement fog lense for my 2003 W203?Any ideas where and how much these are?
Im located in Sydney Australia, so somewhere that can ship internationally would help.
Thanks
Member
Hi,
Dealer pricing does worry me, but once I find out the price for the ribbed one then I can compare it to some aftermarket crystal units...
Next would be to compare BiX upgrade?
Dealer pricing does worry me, but once I find out the price for the ribbed one then I can compare it to some aftermarket crystal units...
Next would be to compare BiX upgrade?
Quote:
Dealer pricing does worry me, but once I find out the price for the ribbed one then I can compare it to some aftermarket crystal units...
Next would be to compare BiX upgrade?
Originally Posted by GLO
Hi,Dealer pricing does worry me, but once I find out the price for the ribbed one then I can compare it to some aftermarket crystal units...
Next would be to compare BiX upgrade?
There are no aftermarket sellers here - Try the US - their pricing will be hard to beat - they have the economies of scale.
If you do go for aftermarket units make sure they are made from the highest grade crystal polycarbonate available. I lived in Sydney for 4.5 years - your Aus sun is like ours & low grade poly will go opaque in a few years
Member
One of my fog lenses broke on my car last week and i ordered up a set of clear lenses instead of replacement foggys. I think the clear ones look better and they were only 30 cdn dollars for each side
Moderator Alumni
Quote:
I know, I know. Not funny.
7 months later, still not broken! 3M protective film ftw! If i make it to a year w/ these things, ill be pretty dang happy Originally Posted by Defiant
Who's betting he catches the next rock this week?I know, I know. Not funny.

Member
Quote:
Sounds good. My driver's side foggy recently broke so i decided to replace both sides with clear lenses but i have yet to install them, no time. BUt im definetly going to put some sort of clear film over them to protect from rocks and such since my car is so low in the front its even worse.Originally Posted by TruTaing
7 months later, still not broken! 3M protective film ftw! If i make it to a year w/ these things, ill be pretty dang happy
Almost a Member!
Will this really fit to a 2001 C320 sedan stock front bumper?
Fog light
I just want to make sure because it says...
MODEL: FIT 00-06 W203 C-CLASS C200 C200K C240 C320 MODELS
FITMENT: PERFECT FIT FOR OEM REPLACEMENT PARTS
Fog lights are same as OEM style, so they will be direct fit
Fog light
I just want to make sure because it says...
MODEL: FIT 00-06 W203 C-CLASS C200 C200K C240 C320 MODELS
FITMENT: PERFECT FIT FOR OEM REPLACEMENT PARTS
Fog lights are same as OEM style, so they will be direct fit
Member
I have a 2002 C240 with those fogs. They bolt up the exact same way as the stocks and the projectors themselves can be aimed up and down however you like, they are adjustable. I'll have to take some pics.
MB World Stories
The Best of Mercedes & AMG
ExploreAlmost a Member!
Quote:
Please post pics...mahalo! hehe Originally Posted by NG C-Klasse
I have a 2002 C240 with those fogs. They bolt up the exact same way as the stocks and the projectors themselves can be aimed up and down however you like, they are adjustable. I'll have to take some pics.

Senior Member
yeah post some pics that show the light output on the ground. I was wondering about these also.
MBWorld Fanatic!
Quote:
Please post some pics, what to see how they look installed.Originally Posted by NG C-Klasse
I have a 2002 C240 with those fogs. They bolt up the exact same way as the stocks and the projectors themselves can be aimed up and down however you like, they are adjustable. I'll have to take some pics.
Thanks.
Member
Hahaha, give me a chance. I was getting one of my demo cars ready for a show that's still not over yet. They have cutoffs integrated into the inner housing..so they don't glare all over.
This is the car I just finished (S55):

I'll get pics after the weekend.
This is the car I just finished (S55):

I'll get pics after the weekend.
Almost a Member!
yeah...post pics when you have a chance...thanks bro
Member
might just have to ask my dealer for clear lenses then,(got any part numbers?)
What was the cost of installation?
What was the cost of installation?
MBWorld Fanatic!
Please check your email for bixenons and lens pictures.
Bixenons designed to fit left hand drive cars, won't be allowed in Australia
Bixenons designed to fit left hand drive cars, won't be allowed in Australia

Member
Quote:
Did you get the clear fog lens?Originally Posted by PsiTERROR
Are you saying I can switch the frosty fog lights to clear ones for under $20?
HOw do they look? Can you post a close up?
thanks
Almost a Member!
Hi guys!
I'm looking for aftermarket projector fog lamps for my 07 coupe. Will the oval fogs for AMG front fit my bumper? Or is there any other alternatives?
Thanks!
I'm looking for aftermarket projector fog lamps for my 07 coupe. Will the oval fogs for AMG front fit my bumper? Or is there any other alternatives?
Thanks!
Super Member
OK, i have a problem and was wondering if anyone could help?
I replaced my foggies and it came with LEDs and i understand that LEDs require resistors when lighting up something outside of the car, otherwise it would flicker and not light up. My question is, how do i know what type of resistor to get in the first place? anyone care to shed some light?
thanks in advance!
I replaced my foggies and it came with LEDs and i understand that LEDs require resistors when lighting up something outside of the car, otherwise it would flicker and not light up. My question is, how do i know what type of resistor to get in the first place? anyone care to shed some light?
thanks in advance!
Member
Quote:
I'm looking for aftermarket projector fog lamps for my 07 coupe. Will the oval fogs for AMG front fit my bumper? Or is there any other alternatives?
Thanks!
Forgive my ignorance. I know they stopped exporting the C-Coupe to the U.S mid 2005, but they were sold in Europe through 2007?Originally Posted by cyanide
Hi guys!I'm looking for aftermarket projector fog lamps for my 07 coupe. Will the oval fogs for AMG front fit my bumper? Or is there any other alternatives?
Thanks!
Oh, and how is it as an oil burner?..
..(sorry, IDK about the lights..)
Almost a Member!
Yep, mine was assembled in december 2006, and delivered here in norway february 2007.
Oil burner is great
Low milage and runs great 
Oil burner is great
Low milage and runs great 
Super Member
Quote:
I'm looking for aftermarket projector fog lamps for my 07 coupe. Will the oval fogs for AMG front fit my bumper? Or is there any other alternatives?
Thanks!
The AMGs will not fit your car. The facelifted bumper on the coupe uses the same fogs as the pre-facelifted ones, well the same dimensions and fitment anyways, they are of course clear instead of frosty. If you want projector fogs, just look on ebay, there are quite a few to choose from. This is unless you have an AMG kit on your coupe which a few of the members here have.Originally Posted by cyanide
Hi guys!I'm looking for aftermarket projector fog lamps for my 07 coupe. Will the oval fogs for AMG front fit my bumper? Or is there any other alternatives?
Thanks!
Almost a Member!
Oh, I didn't know that! In that case I have a pretty good selection to choose from
I've always thought they look more oval than the pre-facelifted fogs.

I've always thought they look more oval than the pre-facelifted fogs.

Super Member
Quote:
I've always thought they look more oval than the pre-facelifted fogs.
I could be wrong, but on the coupe, the fogs are actually quite rectangular, its the black plastic fake mesh that goes in front of the fogs make them appear round.Originally Posted by cyanide
Oh, I didn't know that! In that case I have a pretty good selection to choose from
I've always thought they look more oval than the pre-facelifted fogs.




