W203/CL203 City Light Thread (LED, HID, bulbs) - All you want to know
http://www.Powerbulbs.com is giving away a free set of 5w5 Bluevision bulbs with every order. Check them out.
The Best of Mercedes & AMG
Hey guys.
How do you keep your city lights on daytime?
Thanks
pic - this is the bulb in a socket...--->
http://209.87.151.155/transfer/image-anime/WHITE-4.gif
link to main page...
http://209.87.151.155/search_results...l=2&subcat=458
Last edited by bagwell; Sep 27, 2002 at 12:18 PM.
I am using PIAA super white (or extreme white, I cant remember, PIAA got so many xxx white!!!), I think they're a nice match with the Xenon. Very white but with a little bluish here and there.
Outside my car, I have LED blinkers on my rear view mirrors!
Hearing that you may be able to get your city lights to use LEDs
is awesome.
Keep at it bagwell.
how di dyou get LED's outside? If you are referring to the stock mirror blinkers, it is now proven that they are filament bulbs.
If you swapped for LED's please post details and pictures!
Thanks
I've bought the Polarg M-4 Bulbs that everyone has mentioned to change out my city lights, however upon removing the plastic cap, disconnecting the wiring harness and then removing the metal spring pin and finally getting a hold of the bulb, I cannot remove the OEM bulb out of the base mount. Is there a trick to it or do I need new base mounts that the bulb goes into? As I look at the bottom of the base mount of the OEM bulb, it says 12V, 55W. Are these the specs of the current bulbs? If so, can I just pull out the current city light bulb from the socket or do I need to buy another base mount from somewhere. I'd like to figure out how to get these installed ASAP. Thanks in advance!!!
Benny
Anyway, "Manny" pointed me to the appropriate "rocket racer" aisle and their A1C brand, 194 LED bulb. Pt # 50.4072.B. I didn't buy it because of all the "load balancing" controversy on previous threads over LEDs, and a concern that the LED might be too "directional" within the City Light housing (I want it to fill with light, not just an intense point in the middle).
I searched all the previous threads for ref to this bulb, but no hits. (Note to self: "Thats odd. I thought Pep-Boys sponsored High-Rev Tuners?") Anybody with any experience with this bulb. I don't want any bulb fault codes with an LED. But I do want lots of bright light (bling, bling).
I also got the PIAA LED wedge bulb, but I still can get it to work yet (error message and the LED is keep blinking). I think I need some kind of resistors in the wiring.




