





W203/CL203 Aftermarket Wheel Thread - All you want to know
19x8.5 front, 235/35/19
19x9.5 rear, 255/35/19 or 265/30/19
btw, I'm gonna try 275/30/19 on my rear, I seriously think it's gonna rub.
my HREs are 19x9.5R ET31, and they rubbed continuously when I ran 265/30's, but it went away when I went with 255/30
ET31 sticks out 4mm more than your ET35, but thats only 1/5"
235's on a 8.5 up front should be fine, until you decide to upgrade to coilovers...then the inner clearance will be a problem.
It also depends on the tire...Toyos and Falkens are skinnier than Goodyear or Michilen.
BTW, what wheels are you getting?
my HREs are 19x9.5R ET31, and they rubbed continuously when I ran 265/30's, but it went away when I went with 255/30
ET31 sticks out 4mm more than your ET35, but thats only 1/5"
235's on a 8.5 up front should be fine, until you decide to upgrade to coilovers...then the inner clearance will be a problem.
It also depends on the tire...Toyos and Falkens are skinnier than Goodyear or Michilen.
BTW, what wheels are you getting?
what will i need to run in the front to be able to do coilovers?
what about general exclaim tires?
I have a set of new 19" wheels that i need to mount some tires on. I dont want to just take them to some random spot so im asking you Pros! I want to know if you guys know of any tire shop's in the Dallas area that i can take my New Rims and Tires to have the tires mounted with no damage.. Thanks gus
235s with rounded wall (Falkens/toyos )will do the trick with COs and 225s are too risky since your wheels would have less protection especially the lips..
The Best of Mercedes & AMG
Having a rounded tires would help to lower my fronts a little bit more.
Just thought I mentioned this, so that you can avoid spacers

Mille miglia T12 in 18", I want to know weights and sizes available
They give that CLK DTM look alike

PS: I cant find any mille miglia website!
the only thing bothers me is they did not use torque wrench..but I could take care of that myself since I could torque the bolts at my garage.
jason
***Wheels removed, I have been advised that product quality with DPE is hit or miss.
I am looking to do 19x8.5 235/35/19 fronts and 19x10 265/30/19 rears, from what I've read in here that should work, right? (I'm on stock suspension)
Also what finishs would guys reccomend for a silver car? I'm thinking silver centre polished lip, black centre polished lip, or all polished.
Thanks In Advance
Tibi
Last edited by Tibi; May 18, 2008 at 07:35 PM.
Thanks for any help you can give this newbie.
Chuck
Thanks for any help you can give this newbie.
Chuck






