CPS - "Crankshaft Position Sensor" Discussion Thread
#1
MBWorld Fanatic!
Thread Starter
CPS - "Crankshaft Position Sensor" Discussion Thread
Because of problems with the damper coming off the crankshaft pulley on the 3.2L V6, MB has redesigned the M112 pulley and is offering at a "good discount". Odd how there is no recall, and MB denial "no problem" (until it fails), but THIS one crank pulley is $200-300 less than the rest from MB ![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
112-035-08-00 Balancer updated $95.76
006-990-70-04 bolt $ 4.79
Here's a link to a thread on ShopForum where many people have had the problem
http://www.mercedesshop.com/shopforu...threadid=63512
Don't know if the new C320's come with this revised part but it may pay to ask the dealer, at least if your warranty is over or close to it.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
112-035-08-00 Balancer updated $95.76
006-990-70-04 bolt $ 4.79
Here's a link to a thread on ShopForum where many people have had the problem
http://www.mercedesshop.com/shopforu...threadid=63512
Don't know if the new C320's come with this revised part but it may pay to ask the dealer, at least if your warranty is over or close to it.
#2
Almost a Member!
Join Date: Jun 2003
Location: Tampa, FL
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
2001 E320, 2003 C230 Kompressor
Re: Crankshaft Pulley Failures on the V6
[i]Don't know if the new C320's come with this revised part but it may pay to ask the dealer, at least if your warranty is over or close to it. [/B]
#4
MBWorld Fanatic!
Brian,
Uh...
Your choice of images tends to overshadow your content.
Evil Squirrel and Stupid Dog, together again reeking havok...
but whats with the guy punching me, metaphorically speaking,
in the face?
Kinda brings back bad childhood memories of living and attending shcool in New Jersey.
Uh...
Your choice of images tends to overshadow your content.
Evil Squirrel and Stupid Dog, together again reeking havok...
but whats with the guy punching me, metaphorically speaking,
in the face?
Kinda brings back bad childhood memories of living and attending shcool in New Jersey.
#5
Super Member
Join Date: Sep 2004
Location: nJ/pHiLLy/nY
Posts: 630
Likes: 0
Received 1 Like
on
1 Post
Audi 225 TT.w203 sedan.Bmw 318tiCali.Ed.VW Jetta vr6
![Exclamation](https://mbworld.org/forums/images/icons/icon4.gif)
as i said, i drove about 2 miles for the first time all day,on my way to NE Philladelphia for a work meeting, i stoped at a red light and before the light turned green i felt my car "stall" out. i put it in D and tried to start it numerous times and it wouldnt stat. i put it in Neutral and tried as well. i didnt want to burn anything out so i put myu hazards on and waiting for my buddy with a tow truck to come get my *** out of the middle of the road.
i saw a scruffy guy sitting at a bus stop and asked him if he wanted to help me out so i gave him $20 to help me push it out of the road. he thanked me 10000 times appoligizing for puting his hands all over the car while he pushed, lol. but anyway...i dont know WHATS WRONG??? could it be my MAF also something under the hood that i dont know what it is, that was ticking, (trying to check manual, and search to find out what it is) will post pic of what is making ticking noise. when i finaly got hime i started the car, it fired right up and ran for 15min. till i shut it off, but now im afraid to drive it, i think i need a MAF also, dont know if this could be affecting it or not. sorry for long post....anyone know whats up?????
![wall](https://mbworld.org/forums/images/smilies/banghead.gif)
#6
Super Member
Join Date: Sep 2004
Location: nJ/pHiLLy/nY
Posts: 630
Likes: 0
Received 1 Like
on
1 Post
Audi 225 TT.w203 sedan.Bmw 318tiCali.Ed.VW Jetta vr6
![Exclamation](https://mbworld.org/forums/images/icons/icon4.gif)
as i said, i drove about 2 miles for the first time all day,on my way to NE Philladelphia for a work meeting, i stoped at a red light and before the light turned green i felt my car "stall" out. i put it in D and tried to start it numerous times and it wouldnt stat. i put it in Neutral and tried as well. i didnt want to burn anything out so i put my hazards on and waiting for my buddy with a tow truck to come get my *** out of the middle of the road.
i saw a scruffy guy sitting at a bus stop and asked him if he wanted to help me out so i gave him $20 to help me push it out of the road. he thanked me 10000 times appoligizing for puting his hands all over the car while he pushed, lol. but anyway...i dont know WHATS WRONG??? could it be my MAF also something under the hood that i dont know what it is, that was ticking, (trying to check manual, and search to find out what it is) will post pic of what is making ticking noise. when i finaly got hime i started the car, it fired right up and ran for 15min. till i shut it off, but now im afraid to drive it, i think i need a MAF also, dont know if this could be affecting it or not. sorry for long post....anyone know whats up?????
![wall](https://mbworld.org/forums/images/smilies/banghead.gif)
Trending Topics
#9
Member
Join Date: Aug 2005
Location: Portland,Oregon
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
2005 MB C230 Kompressor
at first reading it i thought it could be the spark plugs b/c that happened 2 me alot in my '95 c280, but not exacly sure what that could be, nor what could cause the clicking
#10
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
dude, that sucks! sorry to hear that. has the dealer flashed your ECU yet? my car was shaking and would idle really rough and die at times one weekend and all the dealer did was flash the ecu and it was back to normal.
keep us updated!
I love the wheels btw, your car looks great, albeit on a flatbed.
keep us updated!
I love the wheels btw, your car looks great, albeit on a flatbed.
![wall](https://mbworld.org/forums/images/smilies/banghead.gif)
![wwf](https://mbworld.org/forums/images/smilies/chairshot.gif)
#11
Super Member
Join Date: Mar 2004
Location: michigan/ohio/indiana
Posts: 917
Likes: 0
Received 0 Likes
on
0 Posts
2013 c300 4matic, 2002 c240
that happened to me once, but i think my car shutdown due to bad repairs on the rear of the car from an accident i had. i could not get the car started and if it did start, the clicking would come after trying to turn the car on.
#12
Super Member
Join Date: Aug 2005
Location: New York, NY
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Metro Card : (
I just had my SAM module replaced - my SRS would turn on and shut off randomly - they told me while it was being replace that my car would be unsafe to drive, so I was stuck w/ a Camry for a few days. Perhaps it could be the SAM?
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
#14
Super Member
Join Date: Sep 2004
Location: nJ/pHiLLy/nY
Posts: 630
Likes: 0
Received 1 Like
on
1 Post
Audi 225 TT.w203 sedan.Bmw 318tiCali.Ed.VW Jetta vr6
Originally Posted by pookie
that happened to me once, but i think my car shutdown due to bad repairs on the rear of the car from an accident i had. i could not get the car started and if it did start, the clicking would come after trying to turn the car on.
#15
Super Member
Join Date: Sep 2004
Location: nJ/pHiLLy/nY
Posts: 630
Likes: 0
Received 1 Like
on
1 Post
Audi 225 TT.w203 sedan.Bmw 318tiCali.Ed.VW Jetta vr6
Originally Posted by nlpamg
dude, that sucks! sorry to hear that. has the dealer flashed your ECU yet? my car was shaking and would idle really rough and die at times one weekend and all the dealer did was flash the ecu and it was back to normal.
keep us updated!
I love the wheels btw, your car looks great, albeit on a flatbed.
![wwf](https://mbworld.org/forums/images/smilies/chairshot.gif)
keep us updated!
I love the wheels btw, your car looks great, albeit on a flatbed.
![wall](https://mbworld.org/forums/images/smilies/banghead.gif)
![wwf](https://mbworld.org/forums/images/smilies/chairshot.gif)
Today 10:20 AM
KarlBenz Believe problem could lie in Rear Sam which is hardwired to the fuel pumps ,item shown under hood is purge valve for evap system will not shut car off
Today 08:45 AM
jsloan01 I just had my SAM module replaced - my SRS would turn on and shut off randomly - they told me while it was being replace that my car would be unsafe to drive, so I was stuck w/ a Camry for a few days. Perhaps it could be the SAM?
thanks for input, what does SAM do for the fuel pumps? im thinking maybe this could be the problem.....also again, anyone know if it could have anything at all to do with me thinking i need a MAF as well???
#16
Super Member
Join Date: Mar 2005
Location: Southern Methodist University
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
2001 C320 (purple), 2002 BMW 540i
ok the purge valve ticking is actually nothing wrong with the car, it's just a poorly designed bracket that transfers the sound of the pump into the cabin. This is an extremely common problem in the W203, I think pretty-much everyone with a W203 built before the problem was fixed has experienced this. Luckily, the solution is just having the bracket replaced with the new one. Some people have even replaced the bracket themselves.
now for the problem with the car shutting off- I had this problem before. Luckily, when it happened I had actually parked it and turned the engine off. I had it towed to the repair shop which was only 1 mile away from where i was, thankfully. Once it got there the car started up just fine. After running diagnostics they found that the cam possition sensor was the problem. Again, a poorly designed harness that was prone to allowing corrostion of the sensor was to blame. When the sensor would generate errors the engine would be immediately shut off to prevent damage. The risk of it shutting off was random, there was no way to predict when or even if it would shut off on me again. They had to replace the sensor and put an updated harness on.
now for the problem with the car shutting off- I had this problem before. Luckily, when it happened I had actually parked it and turned the engine off. I had it towed to the repair shop which was only 1 mile away from where i was, thankfully. Once it got there the car started up just fine. After running diagnostics they found that the cam possition sensor was the problem. Again, a poorly designed harness that was prone to allowing corrostion of the sensor was to blame. When the sensor would generate errors the engine would be immediately shut off to prevent damage. The risk of it shutting off was random, there was no way to predict when or even if it would shut off on me again. They had to replace the sensor and put an updated harness on.
#17
MBWorld Fanatic!
Join Date: Jul 2005
Location: New York City
Posts: 7,424
Likes: 0
Received 3 Likes
on
2 Posts
C55 ///AMG, 535xi
might be ur ignition, tranny or motor mounts... I had that in my ML, its just that my car shut off in the middle of a hwy!
do a STFF, I remember a w203 memeber had that not THAT long ago, but he has a list of replacements, maybe that would help
do a STFF, I remember a w203 memeber had that not THAT long ago, but he has a list of replacements, maybe that would help
#18
MBWorld Fanatic!
I hope you tried to start it in "P". When you tried to start it did it just turn over until it timed out? If so, my guess is CPS, high failure item that gives the symptoms you had.
#20
Newbie
Join Date: Nov 2005
Location: Los Angeles, CA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
2002 C240 STOCK!
i had the same exact thing happend to my 02 c240, dealer replaced cam positioning sensor or camshaft sensor and the problem went away, also try to disconnect the battery for 5 minutes, that may reset the computer, it helped me.
#21
MBWorld Fanatic!
Join Date: Feb 2004
Location: Milton, MA USA
Posts: 2,977
Received 179 Likes
on
149 Posts
me: 2015 SL400 & 2015 ML400; wife: 2022 GLC Coupe kid: 2017 GLC SUV
when mine went in my w202, my mechanic referred to it as the crank sensor. the sympton simplified: car won't restart warm. I'd be wary of someone "throwing parts" at this problem; you could end up with some great new replacements you didn't need.
#22
Super Member
Join Date: Sep 2004
Location: nJ/pHiLLy/nY
Posts: 630
Likes: 0
Received 1 Like
on
1 Post
Audi 225 TT.w203 sedan.Bmw 318tiCali.Ed.VW Jetta vr6
THANKS everyone who took time to try and help. those are deffinitly all my symptoms. so i guess it could probobly be the CPS or rear SAM. i am going to call and drop of tomorow, also what is this...
"flashing" ECU ? maybee this can help. i need a diagnostic machine!!!
"flashing" ECU ? maybee this can help. i need a diagnostic machine!!!
![wall](https://mbworld.org/forums/images/smilies/banghead.gif)
#23
Super Member
Join Date: Oct 2005
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
2006 Lexus GS300, 2007 Lexus GS350
Sorry to hear about your problems. Check here, maybe others had similar issue and can shed more light
www.lemonmb.com
www.lemonmb.com
#24
Super Member
Join Date: Mar 2005
Location: Southern Methodist University
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
2001 C320 (purple), 2002 BMW 540i
Originally Posted by eddieo45
when mine went in my w202, my mechanic referred to it as the crank sensor. the sympton simplified: car won't restart warm. I'd be wary of someone "throwing parts" at this problem; you could end up with some great new replacements you didn't need.
the issue with the CPS sensor in the W203 is that its prone to corrosion due to a flaw in the design of the harness. Once it starts to corrode it pretty much has to be replaced and, if you don't replace the harness with a new one in which the problem has been fixed, you will eventually run into the same problem again. This problem was fixed at some point so only cars produced before then should have this issue. I don't know when it was fixed, however.