Latest Project (in progress pics)
#3
Senior Member
Join Date: Aug 2005
Location: Phoenix, Az
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
02 C32R
ok, are the same same as the fronts? details, details, details....?? how much, how big, direct bolt up etc.... oh, and what size are the rotors, and how much were the rotors? thanks
#4
MBWorld Fanatic!
Originally Posted by Dead Ringer
ok, are the same same as the fronts? details, details, details....?? how much, how big, direct bolt up etc.... oh, and what size are the rotors, and how much were the rotors? thanks
wowwwwwwwww.....take a deep breathe.....
but i'd like to know the details as well........
#6
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Westchester, NY
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
E55, C32, ML320
It's a C32. The stock AMGs are on the front. The wheels are 18" AMG Style IV (C55).
The rears are bolt-on. I don't have the part #'s and final $ yet. I'll let you know more after I pick up the car and square up with the shop.
The rears are bolt-on. I don't have the part #'s and final $ yet. I'll let you know more after I pick up the car and square up with the shop.
#7
Out Of Control!
Blando,
Where are you located? If you're in southern cali try and see if you can make it to our Socal Benz Photoshot. Pls click on my sig below for more details.
Thanks
Where are you located? If you're in southern cali try and see if you can make it to our Socal Benz Photoshot. Pls click on my sig below for more details.
Thanks
Trending Topics
#8
MBWorld Fanatic!
Originally Posted by blando
It's a C32. The stock AMGs are on the front. The wheels are 18" AMG Style IV (C55).
The rears are bolt-on. I don't have the part #'s and final $ yet. I'll let you know more after I pick up the car and square up with the shop.
The rears are bolt-on. I don't have the part #'s and final $ yet. I'll let you know more after I pick up the car and square up with the shop.
#12
MBWorld Fanatic!
Join Date: May 2004
Location: orange county, ca
Posts: 1,654
Likes: 0
Received 0 Likes
on
0 Posts
2006 E55
oh man, that looks awesome. Definitely keeps us posted on cost.
the rears look bigger than the front though, wont that throw off the braking?
the rears look bigger than the front though, wont that throw off the braking?
#16
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Westchester, NY
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
E55, C32, ML320
The stock rears didn't match the stock fronts... that's for sure. I think it's a huge improvement, especially over that ugly stock caliper. MB should have had matching brakes in the rear from the start - if only for asthetics.
But to your point, as soon as the front rotors need to be replaced, I will replace that setup as well (with the six piston AMG's.)
But to your point, as soon as the front rotors need to be replaced, I will replace that setup as well (with the six piston AMG's.)
#17
Super Member
Join Date: Nov 2004
Location: Los Angeles, CA
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
2006 BMW X5 4.8is and 2005 C55 AMG
If those are actual AMG calibers how come you didn't get the AMG rotors for them? If they are real AMG cals could you post the part# and the shop that got them for you?
#19
MBWorld Fanatic!
Join Date: Aug 2002
Location: North Cuba/West Bimini
Posts: 2,256
Likes: 0
Received 0 Likes
on
0 Posts
Cars and boats!
Originally Posted by FrankW
nice CLK55 rear brakes
IMO you should get the 05 CLK55 6-pot front calipers too to beef up the look for the front
IMO you should get the 05 CLK55 6-pot front calipers too to beef up the look for the front
#20
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Westchester, NY
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
E55, C32, ML320
Edit: This is ricky.agrawal. Group buys that aren't initiated by a current forum sponsor are not permitted. Please contact one of our sponsors to see if they will start the group buy. Thanks!
Response: This is blando. You deleted my entire message, the majority of which was a response to the other member's questions.
If I recall the message I wrote correctly, I was saying that both the front and the rears are direct bolt ons for the W203. 6-pot in front and 4-pot in the rear, along with cross-drilled, slotted, and vented rotors. And it's all AMG OEM equipment.
Anyway, if anybody wants the contact information of the shop that did the work, please PM me or e-mail me at blando333@yahoo.com.
Response: This is blando. You deleted my entire message, the majority of which was a response to the other member's questions.
If I recall the message I wrote correctly, I was saying that both the front and the rears are direct bolt ons for the W203. 6-pot in front and 4-pot in the rear, along with cross-drilled, slotted, and vented rotors. And it's all AMG OEM equipment.
Anyway, if anybody wants the contact information of the shop that did the work, please PM me or e-mail me at blando333@yahoo.com.
Last edited by blando; 09-04-2005 at 07:36 PM.
#22
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Westchester, NY
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
E55, C32, ML320
Originally Posted by alexbenz
do you know if the front kit of a c32 can be put on the rear?
JamE55: I am in NY.
#25
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
Originally Posted by xxbenzc230kxx
yum rear AMG bbk... are those really from a w209 CLK55 rear? man those would really go well with the c32 AMGBBK ... sick mod
I wonder how much for the whole set cost. The Brabus Alcon 6-pot front and 4-pot rear are like $10k plus retail or soemthing...made expensive.