Any Interest in Duplicating EvoSport Headers?
Thread Starter
Junior Member
Joined: Oct 2013
Posts: 41
Likes: 0
2006 SLK55 AMG
Any Interest in Duplicating EvoSport Headers?
Tomorrow I will have a set of EvoSport headers. IMO these were the best bolt on shorty headers for the C55/SLK55. Evosport is no longer in business and these headers are very rare. I have to redo the headgasket on my other car before I stall these headers.
I have contacted only one exhaust manifold maker and looks like the price will be around what they charge for Lexus V8 bolt on shorties ~$900. Instead of doing a complete mock up and having a test vehicle. PPEEngineering can just replicate my headers.
Is there any interest in getting a set made for that price range??
I have contacted only one exhaust manifold maker and looks like the price will be around what they charge for Lexus V8 bolt on shorties ~$900. Instead of doing a complete mock up and having a test vehicle. PPEEngineering can just replicate my headers.
Is there any interest in getting a set made for that price range??
Thread Starter
Junior Member
Joined: Oct 2013
Posts: 41
Likes: 0
2006 SLK55 AMG
What are the part numbers for the stock manifolds? I am trying to figure out which cars these headers will fit. I know they will fit SLK55 and C55. What about E55\S55? 500 series cars? 550 series?
MBWorld Fanatic!
Joined: Oct 2005
Posts: 1,083
Likes: 11
From: PNW
2001 E430
Even if different chassis use the same part #'s it doesn't necessarily mean they will fit. The physical dimensions of the EvoSport headers are larger then the stock intake manifolds. In theory they will fit at the cylinder head and the exhaust downtube but may not fit around the steering column or other obstructions. You will probably have to look pretty closely at the other chassis to see if there are obstructions or not.
MBWorld Fanatic!
Joined: Aug 2011
Posts: 3,428
Likes: 288
From: New Zealand
CLK55 and 500. All these cars have the same block. Not 550 as that is a different engine. There shouldn't be too much of a fitment problem being shorties but certainly the exits might need minor cutting/welding.
MBWorld Fanatic!
Joined: May 2008
Posts: 1,250
Likes: 21
From: Los Angeles, CA
Supercharged CLK500,ML500,S580
This maybe a good option for the W209 cars as well since the C55 and CLK55 use the same front clip and the CLK55 and CLK500 engine bay is almost the same. I have my old manifolds laying around somewhere, so I will get the part numbers.
+1 on the possible rubbing issues. I have MBH LT Headers and the space is VERY tight!
+1 on the possible rubbing issues. I have MBH LT Headers and the space is VERY tight!
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
Junior Member
Joined: Oct 2013
Posts: 41
Likes: 0
2006 SLK55 AMG
I have emailed a few places pictures and description of what I want done. I need to take time and call them. So far these few have contacted me back:
rpmheaders.com
https://myspace.com/conceptfab
cxracing.com
So far only about 5 people have shown interest.
rpmheaders.com
https://myspace.com/conceptfab
cxracing.com
So far only about 5 people have shown interest.
Thread Starter
Junior Member
Joined: Oct 2013
Posts: 41
Likes: 0
2006 SLK55 AMG
GREAT NEWS. A friend of mine is a welder at a car fabrication shop. I have seen his work and he is good. I sent him the evosport headers and he is going to quote me a price. He said he can duplicate them. I am not sure if he will be doing this on the side or thru the business he works for. The business does have an in house dyno. I told him I will make that 14hr drive back home to test these.
Senior Member
Joined: Jul 2014
Posts: 307
Likes: 0
From: Waldorf Maryland
2008 CLK550
GREAT NEWS. A friend of mine is a welder at a car fabrication shop. I have seen his work and he is good. I sent him the evosport headers and he is going to quote me a price. He said he can duplicate them. I am not sure if he will be doing this on the side or thru the business he works for. The business does have an in house dyno. I told him I will make that 14hr drive back home to test these.
Senior Member
Joined: Jul 2014
Posts: 307
Likes: 0
From: Waldorf Maryland
2008 CLK550
Thread Starter
Junior Member
Joined: Oct 2013
Posts: 41
Likes: 0
2006 SLK55 AMG
Fabricator is having a difficult time finding header to down pipe flange for the headers. Its round two bolt but with a flare sticking out into the down pipe. Anybody know of a place the sales these flanges?
Member
Joined: Jun 2003
Posts: 136
Likes: 9
From: Upland, CA
c32, c36, ml55, 95 W124 E320, 380sec, Vw mk1-turbo, H3, Porsche-C4, and Harley V-Rod
evosport is closed?...damn, they still owe me a dynotune. anyone here know of a good dynotuner for my stage 3 evosport kit?...somewhere around L.A. or Orange County.
Thread Starter
Junior Member
Joined: Oct 2013
Posts: 41
Likes: 0
2006 SLK55 AMG
His CNC guy can make the flanges. I have contacted a bunch of aftermarket exhaust fabricators and nobody makes that flange.
Anybody here have any suggestions? If not I guess these wont be duplicated.
Anybody here have any suggestions? If not I guess these wont be duplicated.
Senior Member
Joined: Jul 2014
Posts: 307
Likes: 0
From: Waldorf Maryland
2008 CLK550
Can you post a pic of the flange that's needed to make this complete. I'm sure we can find it somewhere...
Senior Member
Joined: Nov 2014
Posts: 299
Likes: 0
From: So.Cal.
2003 W211 E500
I would be interested but how much would they be? If they are cheap enough I will grab a pair. Can anybody tell me why Mercedes performance headers are so expensive? I am used to paying no more then $500 for a new set of high end headers for my other cars. Are they made out of gold? 
J/K
J/K
MBWorld Fanatic!
Joined: Aug 2011
Posts: 3,428
Likes: 288
From: New Zealand
You could ask eurocharged where they get them from. Or get them CNC'd. Or you could just use a standard flange and provide the opposite flange as a cut and weld on solution like kleemann do with their mid-lengths. It might not be 100% bolt on but if the headers are good quality I can't imagine too many people would want to go back to stock.
Mercedes headers are expensive because there are not many of these cars around, there is less return on the R&D, probably a lower proportion of owners wanting to modify their car and people tend to be wealthier than with domestic cars for example.... so they can. No gold, just economics.
Mercedes headers are expensive because there are not many of these cars around, there is less return on the R&D, probably a lower proportion of owners wanting to modify their car and people tend to be wealthier than with domestic cars for example.... so they can. No gold, just economics.
