Brake disc C36, is it hard to DIY ?
First question : should I do the 4 in the same time ?
also : is it hard to do by yourself and is there any video's that could help ?
Thanks
And probably a rubber mallet. Its also a good time to change your bearings while you have the rotor off
Very simple however, just release the caliper first, then take off the rotor, exchange parts, and reverse.





Not necessary to do the rears at the same time. That is a pitta to do and best get done by a pro
Any other suggestions ? *I don't have infinite budget either*
Trending Topics

The Best of Mercedes & AMG




but as far as I know 1996 C36 are the same everywhere.
Also I saw 2 different Brembo Disc : one with
5 lugs
288 mm disc diameter
25 mm thickness
22.4 mm minimum thickness
46.5 mm height
and the other with :
5 lugs
316 mm disc diameter
28 mm thickness
25.4 mm minimum thickness
46.5 mm height
both fit ?
Last edited by cassard; Jun 7, 2012 at 10:41 AM.
but as far as I know 1996 C36 are the same everywhere.
Also I saw 2 different Brembo Disc : one with
5 lugs
288 mm disc diameter
25 mm thickness
22.4 mm minimum thickness
46.5 mm height
and the other with :
5 lugs
316 mm disc diameter
28 mm thickness
25.4 mm minimum thickness
46.5 mm height
both fit ?



