New to W202 forum





I don't think this forum page is inactive as some say. OK there are times when updates or new topics are slow to be posted, but I guess members are doing other things, like enjoying a drive
Trending Topics
ha ha yeah maybe not as active as the W204 side but from what i have been seeing and reading thus far is a clear indication the consistent ones know what they're talking about and can teach me things.. appreciate the welcome guys
The Best of Mercedes & AMG
gotta get the mechanics in order first... Brakes being one of them! any suggestions? 
ive done all the work to my car except the engine swap (dropped a 02 clk55 engine in) and i wish i would have waited to do it myself. these cars are really easy to work on, i've done a complete tear down on a 5.4 m113 so ive got tons of tools including an engine hoist. but i think you'll find that most of the repairs on this model doesnt require much except a bit of patience. that and this forum, active people now, are an absolute wealth of information.
)but i haven't had the chance to really dive in and get to diagnose those issues
coolant sounds like a loose connection somewhere, so will have to fill up and just spend some time watching, maybe put her up on ramps (cheap at walmart).
just noticed you need a front bumper, im selling the one off my car if you're interested. its black and not perfect but would be 99% after prep and paint. its usually about $500 to paint a bumper (if you just bring it in, without prep and if they use MB bought paint) not sure how much the prep would cost you, i dont think much though.
also throwing in there, if you dont know (you probably do). its cheaper to buy parts from sites like mbdirect, fcpeuro, etc than at the local dealership.
Last edited by mickey13; Jul 26, 2017 at 02:43 PM.




P.S. There is a sticky thread with plenty of DIY videos, so a look around is recommended

P.P.S. As Mickey13 mentioned, I'm the guy who found an old oil leak on the front of the engine that even the dealer never found. I'll copy the link on here later...
Last edited by DRBC43AMG; Jul 26, 2017 at 02:44 PM.
coolant sounds like a loose connection somewhere, so will have to fill up and just spend some time watching, maybe put her up on ramps (cheap at walmart).
just noticed you need a front bumper, im selling the one off my car if you're interested. its black and not perfect but would be 99% after prep and paint. its usually about $500 to paint a bumper (if you just bring it in, without prep and if they use MB bought paint) not sure how much the prep would cost you, i dont think much though.
also throwing in there, if you dont know (you probably do). its cheaper to buy parts from sites like mbdirect, fcpeuro, etc than at the local dealership.
P.S. There is a sticky thread with plenty of DIY videos, so a look around is recommended

P.P.S. As Mickey13 mentioned, I'm the guy who found an old oil leak on the front of the engine that even the dealer never found. I'll copy the link on here later...

yeah seen the vids and saved them lol def gonna be used as refrence for whatver i run into those are the first issues im gonna tackle... then the wiper motor/signals dont work/heat doesnt blow out the vents(assuming its the blower).. Brakes,rotors, & lines/ & Suspension..... After that cosmetics.. refinish my mono's and purchase Mickey's bumper.. trying to get to the cosmetics portion by the middle of next month.. curious are wire harness on these models the same as the other earlier models(biodegradable)?




not like certain years for the c36




yeah no worries, when u get a chance post the link.. that would be appreciated..

yeah seen the vids and saved them lol def gonna be used as refrence for whatver i run into those are the first issues im gonna tackle... then the wiper motor/signals dont work/heat doesnt blow out the vents(assuming its the blower).. Brakes,rotors, & lines/ & Suspension..... After that cosmetics.. refinish my mono's and purchase Mickey's bumper.. trying to get to the cosmetics portion by the middle of next month.. curious are wire harness on these models the same as the other earlier models(biodegradable)?






Thanks i appreciate that! You know since ive been reading the thought has def crossed my mind.. time will tell!
