Bad idea IMO. Unless a "known tuner" has a "well proven kit" made for the 6.2L (63 series) engine, then maybe, just maybe.
Nitrous Oxide Systems (NOS)
Member
Joined: Jun 2008
Posts: 150
Likes: 0
From: AZ
2008 ML320 CDI
sure why not? just throw a 200 shot kit on it and call it a day...
i think you should call some vendors, like ASR? i think they did a n2o kit on a CLS63?
i think you need to do some research and think about it before you ask this question. it's not like your driving a 98 civic and can run 100 shot kit until the motor blows then go get a new one for $500.
i think you should call some vendors, like ASR? i think they did a n2o kit on a CLS63?
i think you need to do some research and think about it before you ask this question. it's not like your driving a 98 civic and can run 100 shot kit until the motor blows then go get a new one for $500.
Member
Joined: Oct 2006
Posts: 222
Likes: 0
From: Central, FL
Viper/Z06/E55/GT500
Have you guys had cars with nitrous???
I have had three, including my Viper GTS. Nitrous is kind of a pain w/filling bottles and all but the results if tuned are awesome and relatively safe., I was actually hoping someone would put the spray on a 63 motor. I think it would work great as long as the computer did not mind it.
Jason
I have had three, including my Viper GTS. Nitrous is kind of a pain w/filling bottles and all but the results if tuned are awesome and relatively safe., I was actually hoping someone would put the spray on a 63 motor. I think it would work great as long as the computer did not mind it.
Jason
Member
Joined: Jun 2008
Posts: 150
Likes: 0
From: AZ
2008 ML320 CDI
Have you guys had cars with nitrous???
I have had three, including my Viper GTS. Nitrous is kind of a pain w/filling bottles and all but the results if tuned are awesome and relatively safe., I was actually hoping someone would put the spray on a 63 motor. I think it would work great as long as the computer did not mind it.
Jason
I have had three, including my Viper GTS. Nitrous is kind of a pain w/filling bottles and all but the results if tuned are awesome and relatively safe., I was actually hoping someone would put the spray on a 63 motor. I think it would work great as long as the computer did not mind it.
Jason
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
MBWorld Fanatic!
Joined: Apr 2007
Posts: 6,171
Likes: 16
300E a couple 1994 w124wagon E320 Wagon/,1971MGB Track/Rally, MG Midget Autocross ,2000 E320 wagon.
If
you do.You had better be contacting someone like Ty over at
http://www.importperformancetrans.com/722.6.shtml
and see if he can beef up and cryo your input and output shaftson the 722.9 and build a custom converter.Gas will snap that trans right off the line.Your Mb warranty would not look kindly on the shattered results.
might as well have the DS custom built and a loop installed.
http://www.importperformancetrans.com/722.6.shtml
and see if he can beef up and cryo your input and output shaftson the 722.9 and build a custom converter.Gas will snap that trans right off the line.Your Mb warranty would not look kindly on the shattered results.
might as well have the DS custom built and a loop installed.
Senior Member
Joined: Mar 2008
Posts: 418
Likes: 1
08 MB
you do.You had better be contacting someone like Ty over at
http://www.importperformancetrans.com/722.6.shtml
and see if he can beef up and cryo your input and output shaftson the 722.9 and build a custom converter.Gas will snap that trans right off the line.Your Mb warranty would not look kindly on the shattered results.
might as well have the DS custom built and a loop installed.
http://www.importperformancetrans.com/722.6.shtml
and see if he can beef up and cryo your input and output shaftson the 722.9 and build a custom converter.Gas will snap that trans right off the line.Your Mb warranty would not look kindly on the shattered results.
might as well have the DS custom built and a loop installed.
As Jason said with a proper tune it's safe and fun. From my experience too many people just slap nitrous on without proper tuning and /or spray too much.
Super Member
Joined: Oct 2008
Posts: 546
Likes: 0
From: Pittsburgh, PA
2009 C63 AMG
I'm resurrecting this thread. I'm thinking about using a quality local tuner to put a modest, well designed, custom NOS kit on my C63. I'd use it sparingly, but sure think it would be fun. The process would be iterative dyno runs, ECU checks, & all the appropriate precautions to do this right. I'd go with the lowest boost which I believe is about 75 - 100 or so.
If I'm not going through 10 tanks a week, use it sparingly, have a quality tuner do the install, and make sure it's on the low end of the scale, why would this not be a problem?
If I'm not going through 10 tanks a week, use it sparingly, have a quality tuner do the install, and make sure it's on the low end of the scale, why would this not be a problem?
That car isn't cheap and it is already very fast...what is your goal?
MBWorld Fanatic!
Joined: Jun 2008
Posts: 4,455
Likes: 31
From: Ny
Anything W/4Wheels
Banned
Joined: Aug 2008
Posts: 2,587
Likes: 0
'09 C63 AMG
One of my friends has an E63 with stock ECU and 100 shot. He's been running it for over a year now. As long as he runs 100 octane he's ok. Not my cup of tea (spray) but the results are hard to argue with.
Best of luck!
Best of luck!
MBWorld Fanatic!
Joined: Mar 2004
Posts: 5,768
Likes: 5
From: South FL & NYC
Your worst nightmare...
I'm resurrecting this thread. I'm thinking about using a quality local tuner to put a modest, well designed, custom NOS kit on my C63. I'd use it sparingly, but sure think it would be fun. The process would be iterative dyno runs, ECU checks, & all the appropriate precautions to do this right. I'd go with the lowest boost which I believe is about 75 - 100 or so.
If I'm not going through 10 tanks a week, use it sparingly, have a quality tuner do the install, and make sure it's on the low end of the scale, why would this not be a problem?
If I'm not going through 10 tanks a week, use it sparingly, have a quality tuner do the install, and make sure it's on the low end of the scale, why would this not be a problem?
MBWorld Fanatic!
Joined: Aug 2006
Posts: 1,885
Likes: 0
From: S.D Cali
CLS63
DO IT! If you need help I have done it and custom NOS contoller pillars in my CLS63
oh and by the way We ( ACG & RARFINANCIAL) have the CLS63 NOS setup dialed in at last dyno 562 rwhp. on 80 shot
oh and by the way We ( ACG & RARFINANCIAL) have the CLS63 NOS setup dialed in
at last dyno 562 rwhp. on 80 shot
Last edited by rarfinancial; Mar 12, 2009 at 12:21 PM.
MBWorld Fanatic!
Joined: Jan 2007
Posts: 2,597
Likes: 19
From: Kuwait
CLS55 2006, CLS 63S 2015
MBWorld Fanatic!
Joined: Aug 2006
Posts: 1,885
Likes: 0
From: S.D Cali
CLS63
when you're staring at my tail lights when you get tree'd at or first track meet up , you may just change your mind 
oh and even funnier than the look on your face will be the fact that I blew by you with your MHP tunning in my car LOL 
HELLO ANDY 
Just like I did with JUICEE63 when I gave him my 18" HRE C21'S and I ran him with my show 20" Vellano wheels on a 91 no NOS tune
HELLO JOSH, sorry I just had to do it..
MBWorld Fanatic!
Joined: Jun 2008
Posts: 4,455
Likes: 31
From: Ny
Anything W/4Wheels
Banned
Joined: Sep 2008
Posts: 1,694
Likes: 2
From: San Diego, CA
07 RS4 sold, R53 Cooper S, 2008 Cayman S, 2012 GTR
BTW: when you tune the NO2, you want to do it on the dyno.. that way you can check your A/F, fuel pressure, timing, and adjust the nitrous jetting to get it all dialed in....
