AMG-010

Does anyone know the wheel alignment specs for C63 when car is lowered on coilovers? There are very few people in Australia that have lowered C63's. Apparently Mercedes have shims for adjustment.
I am not to concerned on handling as i don't drive the car that hard, I just want maximum tyre wear on my new 20's.
Is the rear adjustable?

GHAZAN

rear only toe is adjustable, you'll need camber bolts if you want to adjust
front camber and toe adjustable as far as i recall

AMG-010

Where do I buy camber bolts from ?

GHAZAN

i might of been mistaken...and toe is just adjustable.

camber bolts 000-333-09-71 you'll need 2 sets for front and 2 for rear, try your dealer

someone else should confirm this tho

AMG-010

Thank you, I will check with dealer when alignment is done.
Are they the shims? If they are installed does it allow for full adjustment front and rear?

Palladin

Sir, if you get a chance please ask the dealer for the stock C63 wheel alignment specs and post them up. Looking for front and rear camber and toe specs and acceptable plus/minus ranges. The dealers keep this info secret like it's paramount to national security. Always been curious what the benchmark specs and ranges are for our cars. Thanks.

exdes

this is what I had after I got my alignment done. I can't find the spec sheet so not sure what the acceptable ranges were..

https://mbworld.org/forums/c63-amg-w...alignment.html

Palladin

Thanks for the info. Your specs are pretty much exactly what I ended up with after my last visit to the dealer and install of new tires. As Kojo911 commented on the original thread that is a lot of toe-in at the rear and that is the major factor in our rapid rear tire wear. I was just curious if the specs the dealer gave me were consistent with other results. Guess I just need to keep feeding this little monster rear tires.