CL Weight Saving
#1
Senior Member
Thread Starter
CL Weight Saving
Didn't know where to post this to be honest but maybe we can share some ideas on how to shave some unnecessary weight of our CLs.
Apart from forged lightweight wheels I've also had rotors custom made for my 55k. Results are below. The weight is in kilos.
Front OEM @ 36.18 lbs:
![](https://farm3.staticflickr.com/2905/14050111420_e24ede6920_b.jpg)
Floating front custom @ 26.94 lbs:
![](https://farm6.staticflickr.com/5529/14050128547_d39aa041eb_b.jpg)
Rear OEM @ 21.01 lbs:
![](https://farm3.staticflickr.com/2927/14236449024_9c43e3fc12_b.jpg)
Fixed rear custom @ 16.42 lbs:
![](https://farm6.staticflickr.com/5473/14234443942_1b172279ca_b.jpg)
Had them made to OE dimensions, hence 2 new OE discs in the pictures.
Apart from forged lightweight wheels I've also had rotors custom made for my 55k. Results are below. The weight is in kilos.
Front OEM @ 36.18 lbs:
![](https://farm3.staticflickr.com/2905/14050111420_e24ede6920_b.jpg)
Floating front custom @ 26.94 lbs:
![](https://farm6.staticflickr.com/5529/14050128547_d39aa041eb_b.jpg)
Rear OEM @ 21.01 lbs:
![](https://farm3.staticflickr.com/2927/14236449024_9c43e3fc12_b.jpg)
Fixed rear custom @ 16.42 lbs:
![](https://farm6.staticflickr.com/5473/14234443942_1b172279ca_b.jpg)
Had them made to OE dimensions, hence 2 new OE discs in the pictures.
#6
Who did the rotors and how much?
I wish there was more info available about the chassis/body structure. Also curious of the type of sound deadener used in terms of weight and any structure that may exist only for crash testing and not integrity. I would guess the glass moonroof and motor is a few pounds.
I wish there was more info available about the chassis/body structure. Also curious of the type of sound deadener used in terms of weight and any structure that may exist only for crash testing and not integrity. I would guess the glass moonroof and motor is a few pounds.
Last edited by dfwx; 05-21-2014 at 04:51 PM.
#7
MBWorld Fanatic!
Trending Topics
#8
PLATINUM SPONSOR
My rotors look the same and I also had custom aluminum hats made a few years back for them. Sure saves a lot of weight.
__________________
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd