IS THIS WHEEL SETUP OK?????
Need some help over here! I´m planning to get some wheels, so i need some help with the offset!
This is the setup:
Front: 235/35/19 on 8,5x19 with ET30 offset or should I go with ET35 offset?
Rear: 265/30/19 on 9,5x19 with ET35 offset
Because according to Mandrus wheels, the best setup is Front:19x8.5 ET32
Rear:19x9.5 ET35 (http://www.mandruswheels.com/appguide_19.html)
Im planning to drop the clk also, with H&R springs and shocks...
By the way, doesnt the rim look like an AMG rim?

Thanks!
Need some help over here! I´m planning to get some wheels, so i need some help with the offset!
This is the setup:
Front: 235/35/19 on 8,5x19 with ET30 offset or should I go with ET35 offset?
Rear: 265/30/19 on 9,5x19 with ET35 offset
Because according to Mandrus wheels, the best setup is Front:19x8.5 ET32
Rear:19x9.5 ET35 (http://www.mandruswheels.com/appguide_19.html)
Im planning to drop the clk also, with H&R springs and shocks...
By the way, doesnt the rim look like an AMG rim?

Thanks!
If you plan to get those wheels, your CLK will look somthing like this...
what setup do you have on your car?
suspension, shocks and pads?
Those are the materials that im gonna change for the drop, so what do you advice that i should use??????
P.S i dont want to drop it to much! something like these
Trending Topics
If you don't want your car low then you don't want my set up.
Just get some H&R's with Koni Yellows with #1 pads all around and you'll be set.
The Best of Mercedes & AMG
I'll be posting pics tonight of my new MEGA Rear Lip and the front one to that came from the old rear lip. Tires are stretched like Japan VIP Style but the rear ones are stretched a little to much and I will getting some new rear tires sometime next month.
and yo, the senekas are 3pc right? was it really hard to take em apart and put em back together? im guessin u didnt do that labor, but did they mention anything....cuz i hafta take em apart for when i powdercoat but im like..scared lol
and yo, the senekas are 3pc right? was it really hard to take em apart and put em back together? im guessin u didnt do that labor, but did they mention anything....cuz i hafta take em apart for when i powdercoat but im like..scared lol
I'm lucky I have a local shop that does not charge a lot for the labor. It was only $60 per wheel to take apart and rebuild with a 1 yr warranty on air leaks. That price also included all the details like mounting balancing ect...
BTW...sorry to hijack ur thread OP lol
powdercoating fees should cover all the work they are doing in my opinion. Including tire mounting and balancing.



