dudeasca

hello
i wanna change my stock brakes( i hate the look on my stock calipers ) , with the ones that are bigger
do you know if it will fit my car with amg package ? plug and play ?

cm60k

These calipers are not AMG's..!,

do you want to install them in your conv. E250..??

-;ZAYED;-

dudeasca

cm60k

Ahh, i see,

from which E class you found them.?, cause i think these calipers for "W205/C-Class",,

-;ZAYED;-

dudeasca

cm60k

The photos shows these for "W205", and the MB part #'s for these calipers:-

L #: 011 421 91 98" or "011 421 97 98"

R #: "011 421 92 98" or "011 421 98 98"

no problem, will wait for his answer..

-;ZAYED;-

dudeasca

thanks mate
unfortunatly he doesn't know from what e klasse it comes

dudeasca

i searched also on google with the part numbers..indeed they are from w205 c klasse....
but i really wanna know if it will fit my convertible e250 facelift
love the look on them if i paint it red with mercedes benz writing on white

cm60k

Yeah, these really looks awesome,

i have sense that this nice W205 front calipers will fit to your knuckle,

but i don't want you to tossing money for nothing,

to assure fitment, prefer to measure your caliper hole distance,

from center hole to center hole, and ask the seller to do so,,

cause MB got differ hole measurements, depend to the knuckle M/Y spec..

-;ZAYED;-

400ixl

Thats not the only measurement you need. You will also need to know if the offset is the same to align with the disk and is the caliper height correct to place the pad correctly on the disk. Do these calipers also run the original disks, or are they bigger? If so does this change the dimensions you need.

cm60k

Why need to know the offset of the hub or even of the Rotor, if he will go with calipers & Rotors together..!

if he will install the calipers & Rotors, the main point with the distance between caliper hole to hole,

MB always uses the same Rotor center bore & bolt pattern on all their "saloon/coupe/cab./conv./sport",,

that's why i'm not worry about offset/align of the caliper or even Rotor..

-;ZAYED;-

400ixl

Not talking about the wheel/ disk PCD or C/Bore here.

If the offset of the mount is different to the original car the caliper is from then alignment will be out even if the disk is replaced. Seen it too many times when people assume it will be the same even on the same model, let alone across different models.

Measure twice fit once.

cm60k

Usually "W205" using lower Rotor offset, which is (51mm), and "C207" uses (64.5mm),,

that depend the caliper width & knuckle design,,

"C207" sharing the same knuckle with "W204", but the "W205" has a differ shape,,

Rotor offset/height will be the main thing that makes wheel will goes more forward than it should or not..!

those calipers looks like W205 C300, if so,,

the offset will not be the issue, cause it's (51mm), i don't think Rotor will goes outward, that much for wheel caliper clearance..!?!

-;ZAYED;-

dudeasca

the distance betwen those 2 holes is 140mm

cm60k

I see,

probably & hope yours are the same, did you measure your caliper holes..?

-;ZAYED;-

dudeasca