When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2016 W212 E350 UK style Beam Pattern US style Beam Pattern
Hellooo, i recently upgraded my headlights to the intelligent headlight system on my 2016 w212, but the beam pattern is like the uk style, is there a way to convert it to the us style beam pattern?
You need someone/shop with proper light test machine, and MB Xentry.
They can adjust the height of the beam and the spread to MB standard for LEFT or RIGHT hand drive vehicle.
Since your LED is the 640/641/642 the most advance one, the module must be programmed to also know the correct car level between rear and front.
You need someone/shop with proper light test machine, and MB Xentry.
They can adjust the height of the beam and the spread to MB standard for LEFT or RIGHT hand drive vehicle.
Since your LED is the 640/641/642 the most advance one, the module must be programmed to also know the correct car level between rear and front.
Here I am speaking of PROPER and LEGAL beam spread and height.
Not we doing it eye-balling manual version. like oldie halogen.
.
These videos shows hot to adjust the lights but not how to convert the beam pattern from uk cutoff to us cutoff. My lights are the full led intelligent lights
These videos shows hot to adjust the lights but not how to convert the beam pattern from uk cutoff to us cutoff. My lights are the full led intelligent lights
Dude, there are L/R and Up/Down mechanical adjustment on the light itself.
But you need those light beam sensors to tell you how correct the manual adjustment is and our eyes is not a lumens sensor
The automatic operation must first start with the lights being set as per its market, the manual way. If on a hunting scope it is the ZERO-ing.
While messing with the "Launch X431 Creader Elite 2.0" scanner last week I noticed this option that I assume is a part of an ILS system.
When I Google what it does, I find out that this changes the light pattern if you're visiting a country with a different from your side traffic.
Perhaps this is what will do the trick for you.
Damn, I almost forgot that the Instrument Cluster MENU has adjustment of the headlight for Left or Right Hand Traffic.
Try that and see how......
I dont have that option, initially my car did not have the intelligent light system and we installed it, will try to code in that menu, can you try that option in the menu to see if it changes the beam or flattens it
I dont have that option, initially my car did not have the intelligent light system and we installed it, will try to code in that menu, can you try that option in the menu to see if it changes the beam or flattens it
By your photo, sure you've intelligent light. So this menu in IC not avaiable for left hand or right hand traffic, that mean in your country this menu is disabled. You can ask some one who has xentry or vidiamo, sure you can change this. Left/right hand traffic can code via your headlight module.
I dont have that option, initially my car did not have the intelligent light system and we installed it, will try to code in that menu, can you try that option in the menu to see if it changes the beam or flattens it
My car is out of action for the next 2 weeks. battery is out.
When I can, I will try to see what happen if I do use RIGHT HAND TRAFFIC ( USA ), instead of current LEFT HAND TRAFFIC ( UK & many of Asian countries )
If you only bought the ILS headlight and the car did not come with it originally, you need to code the gateway Front SAM or Rear SAM ( I am not sure ) to let it know that your car has ILS 640/641/642, otherwise
you can't use it to its maximum potential.
Look for BenzNinja and while at it, get the Xentry from him as an IMPORTANT TOOL. He can code all these ILS stuff for you.
By your photo, sure you've intelligent light. So this menu in IC not avaiable for left hand or right hand traffic, that mean in your country this menu is disabled. You can ask some one who has xentry or vidiamo, sure you can change this. Left/right hand traffic can code via your headlight module.
Does this disable intelligent light system features or give any errors
Does this disable intelligent light system features or give any errors
Yes, can disable or enable intelligent system features. And some time, if the headlight has mechanical issues and don't want change new headlight, somebody disable some features to ignore error code, but I'm not recommended that.
Damn, I almost forgot that the Instrument Cluster MENU has adjustment of the headlight for Left or Right Hand Traffic.
Try that and see how......
Ir-regardless, the intelligent lighting system was not approved for US use, I would doubt there's a US light setting vs. the Euro setting since it was never an option here. Also, tourist mode just changes the lighting based on which lane you are driving in, in a left hand drive car if you want to drive in a left lane country or vice versa.
Irregardless, the intelligent lighting system was not approved for US use, I would doubt there's a US light setting vs. the Euro setting since it was never an option here. Also, tourist mode just changes which lane you are driving in, in a left hand drive car if you want to drive in a left lane country or vice versa.
I only wan tto change the beam, not the country of the lights
I only wan tto change the beam, not the country of the lights
Yes, i got that, since the ILS was not an option in the US, I doubt they would have coded a beam pattern difference from the Euro. If in fact it's possible, Benz Ninja would know
Yes, i got that, since the ILS was not an option in the US, I doubt they would have coded a beam pattern difference from the Euro. If in fact it's possible, Benz Ninja would know
Alright, will update you once i take the car to a coder. The goal will be to change the beam shape to us style with keeping intelligent lights enabled. Not us coding, but us shape as i have shown in the pictures above, so i wont blind others
Alright, will update you once i take the car to a coder. The goal will be to change the beam shape to us style with keeping intelligent lights enabled. Not us coding, but us shape as i have shown in the pictures above, so i wont blind others
I understand clearly what your after, you need to understand what I'm telling you, ILS was not ever approved for the US market, no US beam pattern is programmed into ILS /Euro I don't believe from my past research, Tourist mode only adjusts the lights from left lane driving to right lane driving
I understand clearly what your after, you need to understand what I'm telling you, ILS was not ever approved for the US market, no US beam pattern is programmed into ILS /Euro I don't believe from my past research, Tourist mode only adjusts the lights from left lane driving to right lane driving
Yup, that is what i am targeting, becaus in the current setup it is blinding people on the opposite lane. But i want to be sure if i enabled that menu and changed the lane, will intelligent light system be disabled? We need someone with a 2016 e class and intelligent lights thta lives in europe to test it
2015 SL400 (M276 Turbo), 2014 C350 Sport (M276 NA), 2004 SL500 (M113), 2004 Audi TT225 (BEA)
This is what is confusing to me. Both of my cars (2014 C350 and 2015 SL400) are imprinted with Intelligent Light System on the headlight. Both are US-spec cars. I will ask BenzNinja what that means.
Ir-regardless, the intelligent lighting system was not approved for US use, I would doubt there's a US light setting vs. the Euro setting since it was never an option here. Also, tourist mode just changes the lighting based on which lane you are driving in, in a left hand drive car if you want to drive in a left lane country or vice versa.
Yes yes, I remember now. ILS to European full capability is not US approved.... poor soul.
Must code a lot....
This is what is confusing to me. Both of my cars (2014 C350 and 2015 SL400) are imprinted with Intelligent Light System on the headlight. Both are US-spec cars. I will ask BenzNinja what that means.
2015 SL400 2014 C350
It is MB fault.
They lack of creativity to call those features
The LED LED ILS 640/641/642 is called Dynamic LED. Which is also Intelligent Light System aka ILS
So Dynamic LED is supposedly the best there is.
I too get confused with MB brochures or sales video, as they are not the same as WIS.
So WIS is a better name technically.
So US market probably get Code 642, a dumb down version of INTELLIGENT .... he he he he.
See full data in zip for ALL cars and Code 640/641/642 & Auto High Beam code 628 or 608
05-05-2024, 08:51 AM
like oldie halogen.
