When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi All !
I have replaced both rear radar sensors for Active Blind Sopt Assist, also replaced wiring loom as the connectors where corroded, in Xentry i am not able to get it initialized, Xentry states "Outside Permissible Range" any advise of how to proceed ?
Does it need programming, SW upload ?
Regards:
Jobba
Hi All !
I have replaced both rear radar sensors for Active Blind Sopt Assist, also replaced wiring loom as the connectors where corroded, in Xentry i am not able to get it initialized, Xentry states "Outside Permissible Range" any advise of how to proceed ?
Does it need programming, SW upload ?
Regards:
Jobba
These numbers are way out there...
At least the harness and bumper modules are now working.
People have reported replacements with used modules being easy "plug-n-play".... yours are not.
You may not have direct matching unit that need to be SCN coded. A normal process for any new modules.
Hi All !
I have replaced both rear radar sensors for Active Blind Sopt Assist, also replaced wiring loom as the connectors where corroded, in Xentry i am not able to get it initialized, Xentry states "Outside Permissible Range" any advise of how to proceed ?
Does it need programming, SW upload ?
Regards:
Jobba
where did you get the blind spot sensors from? You cannot just buy from eBay or something. The sensor needs to be the correct one for your car. I went thru this and got mine working after getting the sensor from the dealer ($$$).
There is no coding for this by BenzNinja. It is plug-and-play when the sensors are correct. Xentry (DAS) has nothing to do with these.
where did you get the blind spot sensors from? You cannot just buy from eBay or something. The sensor needs to be the correct one for your car. I went thru this and got mine working after getting the sensor from the dealer ($$$).
There is no coding for this by BenzNinja. It is plug-and-play when the sensors are correct. Xentry (DAS) has nothing to do with these.
Used sensors with matching HW & SW numbers, how did you determin what was correct sensors for your car ?
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
