W220 s65 motor mounts DIY-does it exist?
#1
Junior Member
Thread Starter
W220 s65 motor mounts DIY-does it exist?
Does anyone have a guide or description on how to replace the motor mounts on an s65 w220 specific to this vehicle?
#4
MBWorld Fanatic!
Yes it can, but you don't need to remove the engine, just raise it slightly.
Here are the best motor mount threads:
https://mbworld.org/forums/sl55-amg-...sl-models.html
https://mbworld.org/forums/cl55-amg-...ml#post5759593
https://mbworld.org/forums/s55-amg-s...-job-done.html
https://mbworld.org/forums/s55-amg-s...ml#post5856300
Good luck, and let us know how you get on!
Nick
Here are the best motor mount threads:
https://mbworld.org/forums/sl55-amg-...sl-models.html
https://mbworld.org/forums/cl55-amg-...ml#post5759593
https://mbworld.org/forums/s55-amg-s...-job-done.html
https://mbworld.org/forums/s55-amg-s...ml#post5856300
Good luck, and let us know how you get on!
Nick
#5
MBWorld Fanatic!
Just did it last week. Motor had to be raised enough for access. Damn engine mount shield and cooling lines for the turbo are in the way to wrench around for the driver's, however the bolts can be accessed. Complete removal is not necessary. Dropping the exhaust out of the way helped alot, plus gave me a chance to install my downpipes. Don't forget to pop in a new transmission mount as well and check out the flex disc attached to the transmission and center bearing.
Last edited by benz_addict; 02-19-2014 at 02:30 AM.