MHP AMG 63 Thermalnators
#227
Banned
Thread Starter
Join Date: Aug 2008
Posts: 2,587
Likes: 0
Received 0 Likes
on
0 Posts
'09 C63 AMG
LOL!!!! Keep digging into that Ford past. I didn't say MB left nothing. I simply think your assumptions from a ford are clouding your judgement. This is not the first discussion on heads or the advantages of porting. The E55 guys went through all the SLR cams, VRP cams, etc. only to find that there is only so much there. Even if you could make the power you claim (which i still doubt), what about heat control?
Again, like I've said multiple times in this thread alone, you're looking in the wrong places for power with H/C on a PD blown motor, even the exhaust isn't as critical as other components I haven't seen addressed yet. Yes, with more power (especially in a FI app) comes more heat, which needs to be addressed. I'm sure everyone and their mom makes upgraded cooling systems, heat exchangers, etc. for your cars?
#229
Banned
Thread Starter
Join Date: Aug 2008
Posts: 2,587
Likes: 0
Received 0 Likes
on
0 Posts
'09 C63 AMG
#230
MBWorld Fanatic!
Not an insult. I'm not much for glancing blows. If I were insulting you, you'd be sure of it.
You are the one that started boasting on your 63 so I wondered where the power came from. I've never seen a 500rwhp 63, so that already peaked my interest, then you said 575 which is very impressive so I want to know how.
Yes, I did jab at you for buying anything from a tool, even if it were the cure to cancer.
You are the one that started boasting on your 63 so I wondered where the power came from. I've never seen a 500rwhp 63, so that already peaked my interest, then you said 575 which is very impressive so I want to know how.
Yes, I did jab at you for buying anything from a tool, even if it were the cure to cancer.
...so what are the numbers on your 55? WHP and 1/4 et?
#231
Out Of Control!!
Join Date: Sep 2004
Location: San Diego
Posts: 13,394
Likes: 0
Received 4 Likes
on
4 Posts
2015 S212
I'm not assuming anything about anything. We are already porting the second set of 6.2 heads (first to be released) and are awaiting the billet cams. My past experiences don't cloud my head, they give me a basis of knowledge that can be applied to most any situation. What you don't seem to understand is that engines are engines, simply large air pumps. I don't care who makes them, if they're hand assembled or not, they all serve the same function.
Again, like I've said multiple times in this thread alone, you're looking in the wrong places for power with H/C on a PD blown motor, even the exhaust isn't as critical as other components I haven't seen addressed yet. Yes, with more power (especially in a FI app) comes more heat, which needs to be addressed. I'm sure everyone and their mom makes upgraded cooling systems, heat exchangers, etc. for your cars?
Again, like I've said multiple times in this thread alone, you're looking in the wrong places for power with H/C on a PD blown motor, even the exhaust isn't as critical as other components I haven't seen addressed yet. Yes, with more power (especially in a FI app) comes more heat, which needs to be addressed. I'm sure everyone and their mom makes upgraded cooling systems, heat exchangers, etc. for your cars?
Here is where you and I are disjoined. I'm not implying that an AMG is "special" because it was hand made. I am saying that the electronic coding, tighter tolerances, etc. make it harder to apply your theory without sufficient R&D. That's it. I'm not doubting your knowledge on engine theory. But, applying that to each application takes time. Taking a blown head and polishing it does not prove a thing. have you done it, put it on a car and shown the gains? If so, please post the data. If not, then please stop making claims based on "potential".
#233
Out Of Control!!
Join Date: Sep 2004
Location: San Diego
Posts: 13,394
Likes: 0
Received 4 Likes
on
4 Posts
2015 S212
What friggin log have you been living under for the past 7 months? All the dyno sheets where posted on my car back in February of this year. I recently went 11.4 @123 on motor only. 575 is very realistic, people used to think I would come on here and just flap my jaws, but I have backed up everything I have ever said. All you 55 guys thought a 63 could never come close to the performance of a 55, what do you have to say now? Don't belive me? Ask around, I have published numerous dyno sheets, time slips, pics and video proof as well as have had numerous eyewitnesses from this board an different events and track days I have attended.
...so what are the numbers on your 55? WHP and 1/4 et?
...so what are the numbers on your 55? WHP and 1/4 et?
Mine will be dyno'd next week, but it is just a stage 5 E55 now. What does my car have to do with 63 mods?
#234
MBWorld Fanatic!
What friggin log have you been living under for the past 7 months? All the dyno sheets where posted on my car back in February of this year. I recently went 11.4 @123 on motor only. 575 is very realistic, people used to think I would come on here and just flap my jaws, but I have backed up everything I have ever said. All you 55 guys thought a 63 could never come close to the performance of a 55, what do you have to say now? Don't belive me? Ask around, I have published numerous dyno sheets, time slips, pics and video proof as well as have had numerous eyewitnesses from this board an different events and track days I have attended.
...so what are the numbers on your 55? WHP and 1/4 et?
...so what are the numbers on your 55? WHP and 1/4 et?
you can't even make your car go 11.50's...LOL!
#235
Out Of Control!!
Join Date: Sep 2004
Location: San Diego
Posts: 13,394
Likes: 0
Received 4 Likes
on
4 Posts
2015 S212
Jangy, nevermind, I just checked the record books, i don't see you on either fasted MB list and I am on there, therfore that means end of discussion and my attempts and knowledge of modding cars is far superior to yours. You are rolling around in car with a proven and capable powerplant and you can't even match the perfomance of my barley a year old technology. Just wait until a few more tuners start fiddling with the 63's, they will even me faster.
you can't even make your car go 11.50's...LOL!
you can't even make your car go 11.50's...LOL!
#236
MBWorld Fanatic!
I've been around, I just don't remember any of the details on what was done. I know about the slips, etc. And that you have been active. I'm not calling BS on you, I just wondered where the power came from. I also didn't say that 575 is not attainable, I just don't think anyone has the mods to get there now (without NOS).
Mine will be dyno'd next week, but it is just a stage 5 E55 now. What does my car have to do with 63 mods?
Mine will be dyno'd next week, but it is just a stage 5 E55 now. What does my car have to do with 63 mods?
Mod list.....again
ECU tune
Longtube Headers
Cat delete
X-Pipe
VRP CF Large Capacity Airbox
Dymag Wheels
That's it, those are the only performance mods on my car. I'm still running the stock AMG mufflers for crying out loud. I have not even begun to tap all the potential this motor has.
Come see me in November once the heads and cams are installed. If my car does not make 575 at the wheels you can print off this thread and I will eat it!
#237
Banned
Thread Starter
Join Date: Aug 2008
Posts: 2,587
Likes: 0
Received 0 Likes
on
0 Posts
'09 C63 AMG
Here is where you and I are disjoined. I'm not implying that an AMG is "special" because it was hand made. I am saying that the electronic coding, tighter tolerances, etc. make it harder to apply your theory without sufficient R&D. That's it. I'm not doubting your knowledge on engine theory. But, applying that to each application takes time. Taking a blown head and polishing it does not prove a thing. have you done it, put it on a car and shown the gains? If so, please post the data. If not, then please stop making claims based on "potential".
I cannot count the number of ported heads we've done for blower, turbo, N/A and nitrous apps. I can tell you from my own personal experience and those of the world class builders I associate myself with that gong H/C with a PD blower is a waste of time. I've already stated what the greatest limiting factor in a FI motor is in this thread and it's not H/C.
#238
Out Of Control!!
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
Yea, MIR should be awesome! We should get along great, we are both crazy modaholics.
Back to your regularly scheduled bickering
#239
Banned
Thread Starter
Join Date: Aug 2008
Posts: 2,587
Likes: 0
Received 0 Likes
on
0 Posts
'09 C63 AMG
![Cheers](https://mbworld.org/forums/images/smilies/cheers.gif)
#240
MBWorld Fanatic!
I road race the car more than I drag race it, so I am well aware of it's road race capabilities.
#241
Banned
Thread Starter
Join Date: Aug 2008
Posts: 2,587
Likes: 0
Received 0 Likes
on
0 Posts
'09 C63 AMG
Haha, just weighing my options. Most likely between now and MIR the only changes I will make are wheels/tires and a tune and maybe axles. Oh yea, and the ice reservoir should go in this weekend if everything goes as planned. I'll admit that I dont have the funds to do everything I want and go toe to toe with you but I will give it a shot. You should build a 55, it will be faster than your 63 ![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
Yea, MIR should be awesome! We should get along great, we are both crazy modaholics.
Back to your regularly scheduled bickering
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
Yea, MIR should be awesome! We should get along great, we are both crazy modaholics.
Back to your regularly scheduled bickering
Thanks
Andy
#243
MBWorld Fanatic!
Jangy; I have heard stories about you through the grapevine, I'm glad I have fianlly gotten this chance to go toe-to-toe with you. You and I could possibly be the two biggest *****s on this board, I think we need to figure out who is the bigger A-hole *****!
I can tell you that right now your responses are not too impressive. You're using noob like comeback lines...you can do better than that can't you Jangy? Come on dig deep into that little brain of yours and try to come up with some good stuff.
I can tell you that right now your responses are not too impressive. You're using noob like comeback lines...you can do better than that can't you Jangy? Come on dig deep into that little brain of yours and try to come up with some good stuff.
Last edited by jrcart; 09-05-2008 at 02:08 PM.
#244
MBWorld Fanatic!
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Last edited by jrcart; 09-05-2008 at 02:10 PM.
#245
Out Of Control!!
#246
Banned
Thread Starter
Join Date: Aug 2008
Posts: 2,587
Likes: 0
Received 0 Likes
on
0 Posts
'09 C63 AMG
BLACKBENZZ is fast, he hold the CLK e/t record (not for long
). I also believe he is one of the sponsors who is putting together the entire MIR event in November. He and I now have our own personal friendly grudge match for CLK braging rights...I should re-phrase that, he owns the record so it is I that "holds the grudge". I'm confident I'm gonna get that record before MIR I think our time only a few 1000ths apart if I'm not mistaken, but a few 1000ths might as well be a full second becasue I have not been able to de-thron him in my last two trips to the strip.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#247
Banned
Thread Starter
Join Date: Aug 2008
Posts: 2,587
Likes: 0
Received 0 Likes
on
0 Posts
'09 C63 AMG
I'm in Columbus OH but have satellite/install shops in MI and Edgewood MD. I'm running out to a meeting right now but will address your PM as soon as I get back.
Thanks!
Andy
ps--also thanks for putting together the track rental. I've done a few of them over the years and I know how much of a PITA they can be.
#248
Banned
Join Date: Mar 2006
Location: Southern California
Posts: 2,855
Likes: 0
Received 2 Likes
on
2 Posts
S600TT, R350
https://mbworld.org/forums/showthrea...59#post3035259
Just updated.
I really appreciate everyone's support. Thank you gentlemen!
I think we just need to cool for it now and let the products speak for themselves.
Andy, I always appreciate a fellow gearhead. If you can back up your claims and if you are interested, I would gladly help you with distribution and installation on the West Coast.
Just updated.
I really appreciate everyone's support. Thank you gentlemen!
I think we just need to cool for it now and let the products speak for themselves.
Andy, I always appreciate a fellow gearhead. If you can back up your claims and if you are interested, I would gladly help you with distribution and installation on the West Coast.
#249
Out Of Control!!
BLACKBENZZ is fast, he hold the CLK e/t record (not for long
). I also believe he is one of the sponsors who is putting together the entire MIR event in November. He and I now have our own personal friendly grudge match for CLK braging rights...I should re-phrase that, he owns the record so it is I that "holds the grudge". I'm confident I'm gonna get that record before MIR I think our time only a few 1000ths apart if I'm not mistaken, but a few 1000ths might as well be a full second becasue I have not been able to de-thron him in my last two trips to the strip.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Ahmad,
I'm in Columbus OH but have satellite/install shops in MI and Edgewood MD. I'm running out to a meeting right now but will address your PM as soon as I get back.
Thanks!
Andy
ps--also thanks for putting together the track rental. I've done a few of them over the years and I know how much of a PITA they can be.
I'm in Columbus OH but have satellite/install shops in MI and Edgewood MD. I'm running out to a meeting right now but will address your PM as soon as I get back.
Thanks!
Andy
ps--also thanks for putting together the track rental. I've done a few of them over the years and I know how much of a PITA they can be.
No problem. I've done many rentals in the past and have come out of pocket a few hundred bucks several times. It's all about going out and having fun with fellow gearheads. There will be a nice collection of cars there and hopefully everyone will have fun! Keep your fingers crossed for good DA!!!