Air Filter System
#1
Super Member
Thread Starter
Join Date: Dec 2008
Location: NorCal
Posts: 574
Likes: 0
Received 1 Like
on
1 Post
W211,E90,E66,E39,E38,NSX,Z32-TT
Air Filter System
What do you guys think about this? Looks like a good design ? I'm considering it but concern that the air under the hood may be way too hot for any performance gains. What do you guys think?
http://www.globalautoshop.com/access...ons/e_w211.htm
http://www.globalautoshop.com/access...ons/e_w211.htm
#2
cant really see how it installs. looks like they attempted to make a heat shield so maybe, BUT i don't like the fact they sell electric superchargers (aka SCAM)....so i wouldnt buy their products IMHO
#4
Did the same thing for about $40 from pepboys.
Supercharger sounded nice but I ended up removing it as after driving with it for a week the car felt noticeably more sluggish.
Link to thread
https://mbworld.org/forums/w211-amg/...han-stock.html
Supercharger sounded nice but I ended up removing it as after driving with it for a week the car felt noticeably more sluggish.
Link to thread
https://mbworld.org/forums/w211-amg/...han-stock.html
#7
Senior Member
Join Date: Jul 2009
Location: Latitude 26.1695, Longitude -80.0997
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
my wife wild, but she loves every minute of it.
Please - don't buy the electric supercharger until you buy the bridge I have for sale!
Moreover, sucking in heated air in the engine compartment is NOT the way to go. At the very least, some ducts to the front of the car, or to the high-pressure area at the base of the windshield.
Trending Topics
#8
PLATINUM SPONSOR
I wouldn`t put that on a weedeater!
__________________
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#11
Super Member
+10,000
Looks like the same intake setup my little brother put on his s-10 when he was 16. I think he paid 20 bucks for it online.
That vendor is probably profiting $305 or more, the tube isn't insulated and will get heat-soaked in 5 seconds.
I'd go looking for something else or if you're set on it, buy it online for $20.
Looks like the same intake setup my little brother put on his s-10 when he was 16. I think he paid 20 bucks for it online.
That vendor is probably profiting $305 or more, the tube isn't insulated and will get heat-soaked in 5 seconds.
I'd go looking for something else or if you're set on it, buy it online for $20.
#12
Super Member
Well I agree but for diffrent resons, Filter area looks way to small and restrictive. Yes heat will always be an issue, sucks having the air box siting ontop of the valve cover.
#13