Star Diagnostic How To DIY with lots o pics
Would really appreciate it.
Just got my MB Star C4 today but didn't work out yet.
Have some questions and need advice:
1) Do I need additional power supply to the mutiplexer ?
- I guess no need. Just 2 cables, one to computer through RS232, one to Car's ODBII. But why I ask because I see there is a power adaptor sticking out of the RS232 cable/connector. Power should be supplied by vehicle's through ODBII all the time.
2) I don't have RS232 on my Lenovo T400 so I use USB-RS232 convertor. I know Oxygen confirmed it work since I saw pictures of Oxygen's setup. But do I need to do any additional configuration for this setup ? Or do I need to do any configuration to RS232 ?
3) Now the VM is working and after connecting vehicle through DAS I got error msg and not sure how to proceed to move further.
I looked through all posts under this thread and saw so many nice works done here by MB Star. I can't wait to give it a try.
Thanks in advance and Merry Christmas !
The Best of Mercedes & AMG
Last edited by pearlpower; Jan 15, 2012 at 12:20 AM.
The link below shows how it looks like with flashing brakelights on a E63. You need to have a certain speed, and you have to brake hard, it's constant red (as normal) for a second and then it starts to flash...
http://www.youtube.com/watch?v=SIVPYOR1aFY
-Stian-
The link below shows how it looks like with flashing brakelights on a E63. You need to have a certain speed, and you have to brake hard, it's constant red (as normal) for a second and then it starts to flash...
http://www.youtube.com/watch?v=SIVPYOR1aFY
-Stian-
Also flashing brake is at 1:42 in the video.

If you are too lazy to read what already been shared, I'm pretty sure we're too lazy to spoon-feed you that same exact information.
-G
Last edited by GregMB; Feb 11, 2012 at 07:16 AM.









