12 ECU flashes and 3 hours of road tuning!
#26
Senior Member
#27
PLATINUM SPONSOR
Thread Starter
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
__________________
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#29
Senior Member
Join Date: Jun 2010
Location: Spring/Houston, TX
Posts: 273
Likes: 0
Received 1 Like
on
1 Post
CLS 55 AMG, FX45, F-350, Top Secret Widebody Supra (Sold) and other vehicles on another Planet
Brook,
A big thanks to you and Jerry for opening up a whole new world of tuning for these motors! I drove my dad's CLS yesterday after Jerry finished dynoing and holy crap I've never felt a 55 motor respond like that. Our CLS 55s are heavy as heck but the way the tires broke loose in second (just like Shardul) like that was a shocker! I actually had to seriously correct my steering since I didn't expect that to happen. I can't wait for Jerry to apply the same file parameters to my CLS 55. Thanks Brook and Jerry!!!
-Chris
A big thanks to you and Jerry for opening up a whole new world of tuning for these motors! I drove my dad's CLS yesterday after Jerry finished dynoing and holy crap I've never felt a 55 motor respond like that. Our CLS 55s are heavy as heck but the way the tires broke loose in second (just like Shardul) like that was a shocker! I actually had to seriously correct my steering since I didn't expect that to happen. I can't wait for Jerry to apply the same file parameters to my CLS 55. Thanks Brook and Jerry!!!
-Chris
Last edited by cmusngi; 10-12-2010 at 03:36 PM.
#30
Senior Member
Join Date: Jun 2010
Location: Spring/Houston, TX
Posts: 273
Likes: 0
Received 1 Like
on
1 Post
CLS 55 AMG, FX45, F-350, Top Secret Widebody Supra (Sold) and other vehicles on another Planet
Do it man! As soon as Jerry finished dynoing my dad's CLS yesterday, I had to meet up with him. We switched cars the rest of the afternoon and words can't even describe how the car felt. As soon as you get your ECU reflashed, let me know what you think. You'll totally forget how heavy our cars are. I seriously cant wait to get this file on my CLS. Luckily Jerry only lives 30 minutes away from me
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
-Chris
Last edited by cmusngi; 10-12-2010 at 03:36 PM.
#31
Junior Member
Join Date: Jun 2010
Location: Atlanta, GA - Chicago, IL
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
BMW's
Congrats to Jerry for braking open new stuff in the market keep up the good work buddy.
Good luck at the Mile Exotic, Its my Bday weekend during that event I am trying to make it out to see it again this year. But we shall see. Hope you break some records and show them who's boss.
Good luck at the Mile Exotic, Its my Bday weekend during that event I am trying to make it out to see it again this year. But we shall see. Hope you break some records and show them who's boss.
#32
SPONSOR
Congrats to Jerry for braking open new stuff in the market keep up the good work buddy.
Good luck at the Mile Exotic, Its my Bday weekend during that event I am trying to make it out to see it again this year. But we shall see. Hope you break some records and show them who's boss.
Good luck at the Mile Exotic, Its my Bday weekend during that event I am trying to make it out to see it again this year. But we shall see. Hope you break some records and show them who's boss.
#33
MBWorld Fanatic!
Can you please post some pre and post numbers? I have see a post that talks about an increase of 20hp/22trq and tires breaking loose in 2nd gear, but for the benefit of us some hard numbers would be great.
Thanks!
Thanks!
#35
MBWorld Fanatic!
I hate the negativity, so **** all of you!!!
Good luck in the mile.
I want violent shifts.. The ones that make children cry, and makes officals lock down schools..
Good luck in the mile.
I want violent shifts.. The ones that make children cry, and makes officals lock down schools..
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
#36
MBWorld Fanatic!
#37
Senior Member
#38
PLATINUM SPONSOR
Thread Starter
The dyno I use is 1.5 hours away, so I get there when I can.. VIOLENT is the word! My shifts are 80% quicker but that is not the wild part.. All the transitions between shifts, Boost and full power has changed. You would be suprised how much TQ MGT is going on at every throttle stage. My CL has more than the E55`s and it sucked but gone now! More power at all times and things get wild! Lot of fun!
BTW, add another 7hp to the 20 RWHP/22 TQ gain on the CLS, as my update was not the final one.. My road file was put into the CLS and then tweaked on the dyno for more gains over the best dyno tune it had in it!
My car on Sunday, before the road tune was quick but after about the 8th flash, something kicked in and car was in ROAD RAGE mode! S/C was screaming, tires spinning, tranny shifts crisp and holding a solid 11.5 A/F across the range.. Like I said, Jerry changed and altered about 10-15 new parameters that I have not heard of or seen altered yet on AMG`s.. He was super cool and went over them with me.. Many of the parameters had to be custom translated into english from German.. So all this takes a lot of work, testing and research..
__________________
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#41
Senior Member
Baker street Pub In katy Texas !! LOL,
Before anyone thinks he's a booze hound, I was only joking, he lives in Katy. Top guy that one, come on down get a tune already, I was shocked at what his "box tune" did for my car when it was 100% stock, let alone what the last tune did for it with a pully.
Hopefully a few of us will be meeting up this weekend to play, your welcome to join us at anytime.
Before anyone thinks he's a booze hound, I was only joking, he lives in Katy. Top guy that one, come on down get a tune already, I was shocked at what his "box tune" did for my car when it was 100% stock, let alone what the last tune did for it with a pully.
Hopefully a few of us will be meeting up this weekend to play, your welcome to join us at anytime.
#45
MBWorld Fanatic!
Right, I see all these mod threads with Shardul and Exotic Metal(props for having a real 55k car). When are we going to see 1/4 Mile times or some videos of these new performance increases.
#46
Former Vendor of MBWorld
iTrader: (1)
Join Date: May 2008
Location: Houston
Posts: 12,139
Received 293 Likes
on
242 Posts
2003 W211 E55, 2003 W220 S600
Baker street Pub In katy Texas !! LOL,
Before anyone thinks he's a booze hound, I was only joking, he lives in Katy. Top guy that one, come on down get a tune already, I was shocked at what his "box tune" did for my car when it was 100% stock, let alone what the last tune did for it with a pully.
Hopefully a few of us will be meeting up this weekend to play, your welcome to join us at anytime.
Before anyone thinks he's a booze hound, I was only joking, he lives in Katy. Top guy that one, come on down get a tune already, I was shocked at what his "box tune" did for my car when it was 100% stock, let alone what the last tune did for it with a pully.
Hopefully a few of us will be meeting up this weekend to play, your welcome to join us at anytime.
#47
MBWorld Fanatic!
Right, I see all these mod threads with Shardul and Exotic Metal(props for having a real 55k car). When are we going to see 1/4 Mile times or some videos of these new performance increases.
All the west coast guys will be at Famoso next month, and there is a thread from a recent East Coast get together. So vids and time slips abound. The Texas Mile outcome is what I am waiting for
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
#48
Super Member
Baker street Pub In katy Texas !! LOL,
Before anyone thinks he's a booze hound, I was only joking, he lives in Katy. Top guy that one, come on down get a tune already, I was shocked at what his "box tune" did for my car when it was 100% stock, let alone what the last tune did for it with a pully.
Hopefully a few of us will be meeting up this weekend to play, your welcome to join us at anytime.
Before anyone thinks he's a booze hound, I was only joking, he lives in Katy. Top guy that one, come on down get a tune already, I was shocked at what his "box tune" did for my car when it was 100% stock, let alone what the last tune did for it with a pully.
Hopefully a few of us will be meeting up this weekend to play, your welcome to join us at anytime.
I'll also be at the November cars and coffee, I've seen some E55's out there before. You guys will have your mile results by then anyway.
I wonder if Jerry can make progress with a stock car under warranty....
![devil](https://mbworld.org/forums/images/smilies/devil.gif)
#49
Senior Member
Join Date: Sep 2006
Location: West Tennessee
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
E63,,,not any more,,,BMW X5 50i
It sounds like Jerry does some good tunes for the "55",,,,does a "63" pose different challenges??,, or what could be expected from a tune on a stock motor?? Wifey issues...
just doesn't understand!!!
![Argue](https://mbworld.org/forums/images/smilies/argue.gif)
#50
Senior Member
I would be lying if I didnt say I was a little envious of the situation you 55 guys have in regards to making more power. With that being said you Ladies/Gentlemen with tunes has anyone had a tune go "South" if you will?
In the LSX motor world canned tunes can be awful for the car. I am aware of at least 4 cars which blew a motor for faulty tune(which is debateable as its very hard to prove), but luckily for the tuners they are never liable and never is the dealer. So before getting caught with my pants down on a tune for a 30k motor. I would love an opportunity to hear the great and the bad to be able to truely understand if "The Juice is worth the squeeze." Please if something bad did happen do not knock the vendor. Just state the vendor and and what happened. Example: Tune, threw Rod Bearing (Vectormotorsports). Thats all I am looking for. Also does Renntech stand behind their tune?
Thanks in advance!
In the LSX motor world canned tunes can be awful for the car. I am aware of at least 4 cars which blew a motor for faulty tune(which is debateable as its very hard to prove), but luckily for the tuners they are never liable and never is the dealer. So before getting caught with my pants down on a tune for a 30k motor. I would love an opportunity to hear the great and the bad to be able to truely understand if "The Juice is worth the squeeze." Please if something bad did happen do not knock the vendor. Just state the vendor and and what happened. Example: Tune, threw Rod Bearing (Vectormotorsports). Thats all I am looking for. Also does Renntech stand behind their tune?
Thanks in advance!