Thanks for your response. I asked cuz your front tire looks a bit on the stretched side from this angle. A 255 on a 9" wide wheel should really not be stretched. Just sayin'
KW HAS.
20x10.0 +35 265/30/20
20x10.5 +47 295/25/20
need to lower the front a bit more, but supper happy with fitment.
Looks great! I agree, just a tad lower up front. I'd have gone with Bronze wheels as well if I had red calipers. I am surprised you can run a +35 10" wheel up front. I run a 9.5 +32 (3mm spacers) cuz I felt +35 was a bit close to the strut for comfort. Again. It looks awesome.
Looks great! I agree, just a tad lower up front. I'd have gone with Bronze wheels as well if I had red calipers. I am surprised you can run a +35 10" wheel up front. I run a 9.5 +32 (3mm spacers) cuz I felt +35 was a bit close to the strut for comfort. Again. It looks awesome.
Thank you! The 35 upfront is VERY close to the strut, but 1mm or 1 inch, clear is clear lol
I have your near twin, right down to the front splitter, just different wheels.
I see that you have the KW springs....would you give me some insight on the ride quality? I have the latest Renntech springs, not sure who's making them, but am really unhappy with the ride quality. I know it's not gonna ride like an old 126 on Michelins, but it is pounding. It rides harder than the 21' setup on my W213. How do you feel about yours? ( I think that these cars are just way over damped for the USA, just too
hard).
Did you get them from someone on this board?
Thanks for the info, picture of mine for height reference...
ZITO ZF01 Satin Gunmetal
5x112
Front 20x9 ET25 265/30/20
Rear 20x10 ET45 295/30/20
Michelin Pilot Sport 4S
This pic I'm lowered with H&R springs up front and links in the rear. But now its back at factory height which I prefer since the ride quality is much better.
HRE P43SC
Brushed Dark Clear
20"x9" // 20"x10.5"
255/30/20 // 285/25/20
Nice !!!! Do you rub? Also, as far as circumference, are you measuring up even all around? I ask this Bc I have a 4Matic that I’m looking to get wheels for. I would love to go staggered ( I know the only way this would work is if the all around circumference matches up)
@W212_e550 HRE P43SC
Brushed Dark Clear
20"x9" // 20"x10.5"
255/30/20 // 285/25/20
Nice !!!! Do you rub? Also, as far as circumference, are you measuring up even all around? I ask this Bc I have a 4Matic that I’m looking to get wheels for. I would love to go staggered ( I know the only way this would work is if the all around circumference matches up)
I can't comment as to whether this set up rubs or not (hopefully the owner chimes in), but I can tell ya that by running the numbers through a fitment calculator neither the OEM set up NOR this HRE one yields "even numbers" in terms of circumference.
Stock front 2076.6mm. This HRE front 2076.9mm. Stock rear 2053.3mm. This HRE rear 2043.6mm.
Hope this helps.
HRE P43SC
Brushed Dark Clear
20"x9" // 20"x10.5"
255/30/20 // 285/25/20
Nice !!!! Do you rub? Also, as far as circumference, are you measuring up even all around? I ask this Bc I have a 4Matic that I’m looking to get wheels for. I would love to go staggered ( I know the only way this would work is if the all around circumference matches up)
Quote:
Originally Posted by Rehabguy
@W212_e550 HRE P43SC
Brushed Dark Clear
20"x9" // 20"x10.5"
255/30/20 // 285/25/20
Nice !!!! Do you rub? Also, as far as circumference, are you measuring up even all around? I ask this Bc I have a 4Matic that I’m looking to get wheels for. I would love to go staggered ( I know the only way this would work is if the all around circumference matches up)
I can't comment as to whether this set up rubs or not (hopefully the owner chimes in), but I can tell ya that by running the numbers through a fitment calculator neither the OEM set up NOR this HRE one yields "even numbers" in terms of circumference.
Stock front 2076.6mm. This HRE front 2076.9mm. Stock rear 2053.3mm. This HRE rear 2043.6mm.
Hope this helps.
[size=3]This setup did not rub. We 3D scan the wheel wells of any car that comes to us so that we know what the physical limitations of the car are. We always develop the correct offsets for the perfect look with no rubbing.[/suze]
[QUOTE=DCTMOTORSPORTS;7222505]Quick picture shared from forum member @raudiace4
Signature Wheel SV104 with brushed black tinted finish on W212 E63
Front: 19x9.5
Rear: 19x10.5
This thread is freaking beautiful and informative lol.
Question for the hive mind: I'd like to run satin black Forgestar CF5V's on my matte white '14 e63s.
I'm thinking 19x9.5 +35 up front, but I'm unsure of what to do for the rears since they dont make a 10.5" wide wheel, only 10" or 11". Is it even possible to run a 11" wide in the rear?
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
