A turning point in Mercedes tuning...Performance Supercharger Pulley
Q. Why are there different heat ranges? Which one should I use?
A. Part of your spark plug’s responsibilities, in addition to firing a spark, is to remove heat from the combustion chamber. This is accomplished by channeling the heat through the insulator material and metal housing. From there, the heat is transferred to the cylinder head where the engine cooling system can go to work. A spark plug’s heat range is its ability to dissipate heat. The “colder” the plug, the more heat it can channel out of the combustion chamber. In a performance application, colder heat ranges may be necessary to handle the extreme temperatures brought on by higher compression ratios, forced induction, and high RPM’s. While “Colder” plugs may seem to be the way to go, please remember that the spark plug must achieve its “self-cleaning” temperature where it can burn off fuel and carbon deposits. Otherwise, the plug could “foul out” where it is prone to misfiring and poor acceleration. A plug that is too “hot” can overheat, also causing power loss, detonation, pre-ignition, and possible engine damage. A good, general rule of thumb is to start with the factory recommended heat range. For every 75 to 100 hp you add to your engine, you may go to the next colder step. DENSO heat ranges move up as they get colder; 16 would be our hottest Iridium Power plug, 34 would be our coldest (ranges; 16,20,22,24,27,31,34)
I am new to this site and looking for the best info on how to get some more extra poney out of my 02' C32. I have read all on this forum about the ASP, and the Code 3 pulleys? Also do you suggest a tune after the pulley? I am located in Utah, does that present a problem for tuning? Any good deals on pulleys on this forum? Thank you in advance for all your help.
The Best of Mercedes & AMG
http://shop.code3performance.com/pro...3&productId=22
anyone knows if you can run the new mid size pulley and sc pulley together without any problems?
http://shop.code3performance.com/pro...3&productId=22
anyone knows if you can run the new mid size pulley and sc pulley together without any problems?
the mid-size pulley IS a supercharger pulley. it is just slightly larger than the current s/c pulley. its one or the other. the new midsize was made for people with 178s to safely run stacked without crazy tuning for fuel issues or upgrading the fuel system
the mid-size pulley IS a supercharger pulley. it is just slightly larger than the current s/c pulley. its one or the other. the new midsize was made for people with 178s to safely run stacked without crazy tuning for fuel issues or upgrading the fuel system
Jturkel, do you notice a big difference with it on? Any significant gains?
TIA!
what does TIA stand for?
The belt wrap kit is now on there website. http://shop.code3performance.com/pro...3&productId=23
I need to order one but I am waiting to get my boost and a/f gauges installed...
The belt wrap kit is now on there website. http://shop.code3performance.com/pro...3&productId=23
I need to order one but I am waiting to get my boost and a/f gauges installed...




