NEVER TELL ME YOU CAN'T....
#201
Out Of Control!!
I have some rims/tires tires you can use when we hit the track Don't worry guys, this isn't one of those builds that takes years to finish and never see any track numbers.
This car is my pick for quickest MB once it's done
This car is my pick for quickest MB once it's done
#202
Senior Member
Join Date: Feb 2010
Location: Frederick MD
Posts: 263
Received 0 Likes
on
0 Posts
83 500SEC, 87 300D, 02 C32(x2), 02 C320T (x2), 03 C320T4, 03 C320T, 03 E55, 05 E320CDI, 06 E320CDI
I've been trying to get back to MIR for some of the events but I usually have a conflict. Would love to see that 202 run.
#203
Member
Thread Starter
Join Date: Sep 2007
Location: Maryland
Posts: 217
Likes: 0
Received 3 Likes
on
2 Posts
C43/2jz, Ml63, C32
Know them both very well. I guess word is getting around. Always glad to put a face to a name so come on down Ill be the guy in the black car
#205
Member
Thread Starter
Join Date: Sep 2007
Location: Maryland
Posts: 217
Likes: 0
Received 3 Likes
on
2 Posts
C43/2jz, Ml63, C32
I showed up to get her tuned but she isnt having it. Tony managed to make initial contact with my ECU but it took about 30 mins. By the end of the day there was no time left for a second go so he put in the overtime and a different location (Excessive Motorsports) Sad to inform but we were not able to make anything happen. The effort put forth to make something happen was extraordinary and blew me away. Thank you Tony/Eurocharged
SIDE NOTE: After conversing with the owner and the rest of the guys, the type of dyno used is of no concern to me now. It is just a tool to aid in tuning not the final say on how fast a car is. If you can hook that is what matters. Dyno charts are nothing Time slips are everything......I had to say that even though it sounds corny
This will require time and a visit to Eurocharged in about a month and a half. So as I see it that gives me time to buy more stuff and tidy up a few things. Here is a pick and a short pull video. It is the only one I got. Update when something happens.
http://www.youtube.com/watch?v=glsD6D5pBYY
SIDE NOTE: After conversing with the owner and the rest of the guys, the type of dyno used is of no concern to me now. It is just a tool to aid in tuning not the final say on how fast a car is. If you can hook that is what matters. Dyno charts are nothing Time slips are everything......I had to say that even though it sounds corny
This will require time and a visit to Eurocharged in about a month and a half. So as I see it that gives me time to buy more stuff and tidy up a few things. Here is a pick and a short pull video. It is the only one I got. Update when something happens.
http://www.youtube.com/watch?v=glsD6D5pBYY
#206
MBWorld Fanatic!
I showed up to get her tuned but she isnt having it. Tony managed to make initial contact with my ECU but it took about 30 mins. By the end of the day there was no time left for a second go so he put in the overtime and a different location (Excessive Motorsports) Sad to inform but we were not able to make anything happen. The effort put forth to make something happen was extraordinary and blew me away. Thank you Tony/Eurocharged
SIDE NOTE: After conversing with the owner and the rest of the guys, the type of dyno used is of no concern to me now. It is just a tool to aid in tuning not the final say on how fast a car is. If you can hook that is what matters. Dyno charts are nothing Time slips are everything......I had to say that even though it sounds corny
SIDE NOTE: After conversing with the owner and the rest of the guys, the type of dyno used is of no concern to me now. It is just a tool to aid in tuning not the final say on how fast a car is. If you can hook that is what matters. Dyno charts are nothing Time slips are everything......I had to say that even though it sounds corny
#207
Member
Join Date: Dec 2006
Location: durban. south africa
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
02 W203 C32 AMG, 00 W202 AMG, 98 W202 C23K, 98 W202 3.0T, 97 W202 C23T, 93 W201 AMG
wow, just wow.
still needs to tuned right?
i have a 202 with a c240, v6 engine in, and was wondering which swap would be more feasible between c32, c55, and e55k for me.
any help regarding this? i basically need to know about the harness and plug and play capabilites. also, would my tiptronic auto be good enough?
still needs to tuned right?
i have a 202 with a c240, v6 engine in, and was wondering which swap would be more feasible between c32, c55, and e55k for me.
any help regarding this? i basically need to know about the harness and plug and play capabilites. also, would my tiptronic auto be good enough?
#208
Member
Thread Starter
Join Date: Sep 2007
Location: Maryland
Posts: 217
Likes: 0
Received 3 Likes
on
2 Posts
C43/2jz, Ml63, C32
Good and the Bad
A few things happened up till now.
First the good....I purchased a set of Kleemann headers and installed them
Followed up by a full custom stainless steel exhaust
Then installed my rear Ice reservoir with a meziere pump. Instead of running the lines outside I opted to run it inside the car under the carpet. There are chanels that run the length of the car that allow for it. More labor intensive but I think it gives it that professional touch. Also instead of deleting the spare tire (daily driven 50 miles) I fabricated brackets that raised it above the carpet and allowed for removal of the spare.
With all that the sound is great and the raspiness of the headers is wicked coupled with the 3 inch exhaust. Here is the weird part. The car now under wide open throttle runs rich. Not stupid rich but Tuned Rich For the past week I have been driving her and rips down the street. Traction is an issue but AFR is 100% spot on.
Now here is the bad part. I had just finished helping a friend out who is having major car troubles and when I was merging onto I270 I floored it and when the car bounced off the limiter and changed gears it hit so hard I swore I broke something but she kept going. As I got closer to home I was minding my own business when a Black 645 rolled by kind of quick so I went ahead and corrected his sense of speed with mine. As I was pulling off I noticed my car was louder than before. Suspected an exhaust leak and said i would look at it tomorrow. Grabed something to eat and made it home. Today I was heading out and just before I got too far the diff came apart internally. When I jacked the car in the air (both rear tires off the ground) and put in gear the noise is deffinately is comming from the differential I guess i found a weak link in my chain
I was just about to order my S/C pulley monday.
First the good....I purchased a set of Kleemann headers and installed them
Followed up by a full custom stainless steel exhaust
Then installed my rear Ice reservoir with a meziere pump. Instead of running the lines outside I opted to run it inside the car under the carpet. There are chanels that run the length of the car that allow for it. More labor intensive but I think it gives it that professional touch. Also instead of deleting the spare tire (daily driven 50 miles) I fabricated brackets that raised it above the carpet and allowed for removal of the spare.
With all that the sound is great and the raspiness of the headers is wicked coupled with the 3 inch exhaust. Here is the weird part. The car now under wide open throttle runs rich. Not stupid rich but Tuned Rich For the past week I have been driving her and rips down the street. Traction is an issue but AFR is 100% spot on.
Now here is the bad part. I had just finished helping a friend out who is having major car troubles and when I was merging onto I270 I floored it and when the car bounced off the limiter and changed gears it hit so hard I swore I broke something but she kept going. As I got closer to home I was minding my own business when a Black 645 rolled by kind of quick so I went ahead and corrected his sense of speed with mine. As I was pulling off I noticed my car was louder than before. Suspected an exhaust leak and said i would look at it tomorrow. Grabed something to eat and made it home. Today I was heading out and just before I got too far the diff came apart internally. When I jacked the car in the air (both rear tires off the ground) and put in gear the noise is deffinately is comming from the differential I guess i found a weak link in my chain
I was just about to order my S/C pulley monday.
#211
Member
Thread Starter
Join Date: Sep 2007
Location: Maryland
Posts: 217
Likes: 0
Received 3 Likes
on
2 Posts
C43/2jz, Ml63, C32
Right. That modified factory LSD is more than adequate for a N/A 55. Apparently not enough for a kompressor. I had a feeling it was not going to last but I didn't think it was going to go this soon. Locating and ordering parts. If anyone has a spare w210 E430 diff. they are trying to unload shoot me a PM.
#217
Member
Thread Starter
Join Date: Sep 2007
Location: Maryland
Posts: 217
Likes: 0
Received 3 Likes
on
2 Posts
C43/2jz, Ml63, C32
My car is up and running but will be making a trip to the body shop. I made a diff from a Clk55 (209)(208) It is currently an open diff due in part that I wasn't sure a 3.06 would work with a ETC programed for 3.07. Luckily it works and only side effect is a slight delay of shift. Just so if anyone who asks my ETC is not able to be programed.
#218
MBWorld Fanatic!
My car is up and running but will be making a trip to the body shop. I made a diff from a Clk55 (209)(208) It is currently an open diff due in part that I wasn't sure a 3.06 would work with a ETC programed for 3.07. Luckily it works and only side effect is a slight delay of shift. Just so if anyone who asks my ETC is not able to be programed.
#219
Member
Thread Starter
Join Date: Sep 2007
Location: Maryland
Posts: 217
Likes: 0
Received 3 Likes
on
2 Posts
C43/2jz, Ml63, C32
The C43 diff is a joke. The one I constructed from a 190e is a good upgrade for any 43 owner and multiple other cars with mild upgrades. The Clk55 diff is the most bullet proof setup to have in my opinion especially when the quaife goes in. The parts are not interchangeable.
For those familiar with my LSD write up I might update that one and insert a link.
For those familiar with my LSD write up I might update that one and insert a link.
#223
MBWorld Fanatic!
Join Date: Aug 2006
Location: Bowie, Md
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
2006 CLS500 with 55 AMG motor, 2008 Infiniti G35, 2000 Plymouth Grand Voyager
Sweet thread bro! Thanks for the info today. You looked busy as hell at the dealer.
#224
Member
Thread Starter
Join Date: Sep 2007
Location: Maryland
Posts: 217
Likes: 0
Received 3 Likes
on
2 Posts
C43/2jz, Ml63, C32
Just trying to pay the bills....
Offering some input on creating a beast like none have ever seen is what I do.
Hopefully Jeremy will be able to do something this Thursday.
Offering some input on creating a beast like none have ever seen is what I do.
Hopefully Jeremy will be able to do something this Thursday.
#225
Out Of Control!!