300CE WITH 2JZ TWIN TURBO MOTOR SWAP
03-25-2010, 11:45 PM
#1
Super Member
Thread Starter
Join Date: Oct 2007
Location: NEW YORK
Posts: 516
Likes: 0
Received 4 Likes
on
4 Posts
04 E500 20in brabus monoblocks 1 serious 500E & 91 300CE 2JZ 2005 CL65
300CE WITH 2JZ TWIN TURBO MOTOR SWAP
I have started my 300ce swap. I must say this wasnt that hard! here are some pics!
the harness with the eliminated wires and wrapped
w124 cluster with toyota supra gauges
2jz motor done. precision T67 ball bearing turbo and HKS fuel rail
precision front mount intercooler
Heres the motor just dropped in the bay no mounts
heres the motor mounted in the car
the harness with the eliminated wires and wrapped
w124 cluster with toyota supra gauges
2jz motor done. precision T67 ball bearing turbo and HKS fuel rail
precision front mount intercooler
Heres the motor just dropped in the bay no mounts
heres the motor mounted in the car
Last edited by jason3977; 03-25-2010 at 11:57 PM.
Trending Topics
03-26-2010, 01:06 AM
#8
Super Member
Thread Starter
Join Date: Oct 2007
Location: NEW YORK
Posts: 516
Likes: 0
Received 4 Likes
on
4 Posts
04 E500 20in brabus monoblocks 1 serious 500E & 91 300CE 2JZ 2005 CL65
this is a easy swap. the only difference between the regular motor and the 2jz is that the starter is on the drivers side. everything else is in the same place as the regular motor! as for the mounts...the sell them on ebay for $350 shipped to you in 3 day from thailand! comes with all 3 brackets 2 motor and tranny.
03-26-2010, 01:25 AM
#10
Super Member
Thread Starter
Join Date: Oct 2007
Location: NEW YORK
Posts: 516
Likes: 0
Received 4 Likes
on
4 Posts
04 E500 20in brabus monoblocks 1 serious 500E & 91 300CE 2JZ 2005 CL65
http://cgi.ebay.com/ebaymotors/1jz-2...#ht_500wt_1182 thats the link for mounts! yes you can i am keeping mine automatic!!!
03-28-2010, 10:12 AM
#22
MBWorld Fanatic!
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
I'd have to say this could be my favorite MB monster project if fit and finish are top notch! Big fan of what your doing
Is it safe to say this has been done a few times if MB to 2JZ mounts are made and sold on ebay??
Is it safe to say this has been done a few times if MB to 2JZ mounts are made and sold on ebay??
03-28-2010, 02:02 PM
#23
Super Member
Thread Starter
Join Date: Oct 2007
Location: NEW YORK
Posts: 516
Likes: 0
Received 4 Likes
on
4 Posts
04 E500 20in brabus monoblocks 1 serious 500E & 91 300CE 2JZ 2005 CL65
I'd have to say so... i saw the mount brackets on ebay and began to do my research. i compared the motors and the only diff. is the starter is on the other side. everything lines up the same way (alternator power steering a/c compressor)! i would have been done a long time ago but i was buying high performance parts for the motor so when i start i can keep going. i am going to do the fuel tomorrow and get a measurement for the drive shaft so i can have one made! i have 2 bosch 044 fuel pumps going on with a -10 feed line and -6 return fuel line.
For the car i am going to drop and fleer it out a little bit to match my 17" oz amg 3 piece wheels (old school style)
For the car i am going to drop and fleer it out a little bit to match my 17" oz amg 3 piece wheels (old school style)
03-29-2010, 01:21 PM
#24
Super Member
Join Date: Nov 2002
Location: San Jose
Posts: 977
Received 0 Likes
on
0 Posts
300TE / 300E / 300CE
I'm a big fan of conversions. Seems like a straight forward and practical high hp conversion. Did the bracket supplier have a running car, I didn't see it on their website?
