SPNJHockey

In short...stone kicked up and smashed the glass lens cover on one of my fog lights. Could someone kindly provide the fog light assembly diagram with part numbers? Please note that I have the Sport model, and the fog lights are differentiated by having the two horizontal "chrome" (ish) lines as shown below.
Any DIY repair info/tips would help too.

SPNJHockey

T.T.T.

lkchris

Look up Mercedes parts here: http://epc.startekinfo.com

ivanj

Once you get the MB number ask the body shop if they have an alternative.

For example, they are made by Osram Sylvania and there is a Corvette part that is the SAME on some cars and is 1/4 the cost that MBUSA wants.

vettdvr

I repaired my fog light (2003) at home and was surprised how easy it was. I pulled the front under bumper cover and 2 torq screws I had the assembly out. There were only clamps holding the lense on. My guess is yours is the same design.

Check this thread for photos.

https://mbworld.org/forums/e-class-w...d-driving.html

SPNJHockey

Thanks to all.
Blew about 3 hours trying to get into the startekinfo site! Finally got it.

SPNJHockey

Outa luck...local dealer said I had to order the entire fog light ***'y.
Eeeeeeeck!

ivanj

After you get it fixed you might want to try Venture Shield on you car. It covers the lights and front, etc. with a durable plastic that MAY prevent this from happening again.

You could also look in the STAR ads to see if thicker covers are available